Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support

MP560 Brush Mulcher | Baumalight

Brand BaumalightSKU MP560-540
Original price $16,297.00 - Original price $16,897.00
Original price
$16,297.00
$16,297.00 - $16,897.00
Current price $16,297.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Baumalight MP560 is a 500 Series fixed-tooth mulcher for three-point hitch tractors, with a 75 in path and a 60 in rotor carrying 92 bolt-in carbide teeth. It weighs 2,145 lb, cuts from 1.5 in above to 1 in below grade, and runs from a 540 rpm power take-off on a CAT 2 hitch with one tractor remote.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 2,145 lb
  • Path Width: 75 in
  • Rotor Width: 60 in
  • Rotor Diameter: 15 in at the tool tips
  • Rotor Weight: 575 lb with tools
  • Number of Cutters: 92
  • Tooth Part Number: P5000
  • Cutting Style: Carbide tipped bolt in

Fitment / Machine Requirements

  • Hitch Size: CAT 2
  • Quick Hitch Compatible: No
  • Engine Horsepower: 45 to 75
  • Maximum PTO Horsepower: 65
  • Drive Speed: 540 rpm
  • Gearbox Spline Size: 1-3/8 in
  • Tractor End Spline Size: 1-3/8 in
  • Cutting Depth: 1.5 in above to 1 in below grade
  • System Protection: Slip clutch
  • Tractor Remotes Required: 1


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The MP560 is the first tractor head in the line that cuts below grade, and that is the line between knocking growth down and taking it out. A hydraulic door on the front opens and closes from the seat, so an operator holds material in against the rotor for a finer finish or lets it through when the job is speed rather than particle size.

Teeth are bolt-in and come in two styles on the same rotor. Planer teeth take small bites and give the cleanest cut; ripper teeth shred instead of chipping and their v-shaped profile shrugs off the stones that live in a fence line. Both change in the field.

Common Applications

  • Fence line clearing and maintenance
  • Land clearing and brush reclamation behind a mid-size tractor
  • Below-grade cutting on stumps and root collars
  • Right-of-way and trail work over long runs

Selection Notes

  • Match the mulcher to the tractor by power first: 45 to 75 engine horsepower and a maximum of 65 at the power take-off carry this model.
  • The hitch steps up to CAT 2 here and is not quick hitch compatible, unlike the 300 Series heads.
  • One tractor remote is required to work the door. Confirm the tractor has one before ordering.
  • Units ship with P5000 planer teeth fitted. Ripper teeth are the alternative style for below-grade work and in stony ground, and both styles are bolt-in.
  • Freight books from the higher figure, 2,145 lb, so a quote is never short.
  • Read the brush chart below against the tractor's horsepower and transmission. This model is charted in four horsepower columns of its own.
  • Six replacement teeth matching the fitted tooth option come with every Baumalight brush mulcher, shipped in an enclosed compartment on top of the frame, and a D001774 24-pack of 500 Series planer teeth can be added at purchase.
Mount & Interface
Hitch size
CAT 2
Quick hitch compatibility
No
Gearbox spline size
1-3/8 in (35 mm)
Tractor end spline size
1-3/8 in (35 mm)
Cutting Capacity
Path width
75 in (1,905 mm)
Rotor width
60 in (1,524 mm)
Cutting depth
1.5 in (38 mm) above to 1 in (25 mm) below grade
Rotor & Teeth
Rotor diameter at tool tips
15 in (381 mm)
Rotor shaft size
2 in (51 mm)
Rotor weight with tools
575 lb (261 kg)
Number of cutters
92
Cutting style
Carbide tipped bolt in
Tooth part number
P5000
System protection
Slip clutch
Hydraulics
Hydraulic flow and pressure
1 remote, no figure charted
Tractor remotes required
1
Machine Notes
Minimum engine horsepower
45
Maximum engine horsepower
75
Maximum PTO horsepower
65
Drive speed
540 rpm
Brush Capacity, Low Gear
Tractor transmission
Geared, low gear or creeper
Brush Capacity, Hydrostatic
Tractor transmission
Hydrostatic
Dimensions & Weights
Unit weight
2,145 lb (973 kg)
Freight weight
1,988 lb (902 kg)
Freight weight to book
2,145 lb (973 kg)
Shipping size
77 x 48 x 58 in (1,956 x 1,219 x 1,473 mm)
Dimensional weight
1,292 lb (586 kg)
Brush Capacity, Low Gear: Maximum brush cutting sizes, brush diameter in inches
Technique45 HP50 HP60 HP68 HP
Rotor speed1,800 rpm1,800 rpm1,800 rpm1,800 rpm
Low gear1 in1.5 in2 in2.5 in
Creeper2 in2.5 in3 in4 in
Brush Capacity, Hydrostatic: Maximum brush cutting sizes, brush diameter in inches
Technique45 HP50 HP60 HP68 HP
Rotor speed1,800 rpm1,800 rpm1,800 rpm1,800 rpm
Hydrostatic3 in4 in5 in6 in
Cuts to 1 in below grade
Takes stumps and root collars down rather than leaving them to resprout
Operator-controlled front door
Hold material in for a finer finish or let it through for speed, from the seat
92 bolt-in carbide teeth
Worn teeth are replaced in the field rather than the rotor being sent out
Two tooth styles on one rotor
The same head is tuned to clean ground or stony ground without a second machine

Included with Purchase

  • 1 MP560 Brush Mulcher with a 540 rpm gearbox
  • P5000 planer teeth fitted
  • 6 replacement teeth matching the fitted tooth option, shipped in an enclosed compartment on top of the frame
  • Slip clutch driveline protection
  • 1 free replacement belt, mounted on the unit in its built-in belt storage bay
  • D001774 24-pack of 500 Series planer teeth, where the buy box choice reads 6 Included + 24 Pack

Not Included Unless Stated

  • Power take-off driveshaft
  • Ripper style teeth
  • Tractor
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

FMP780 Flail Mower | Baumalight

Baumalight
Original price $9,287.00 - Original price $9,287.00
Original price
$9,287.00
$9,287.00 - $9,287.00
Current price $9,287.00

The Baumalight FMP780 is a three-point-hitch flail mower for tractors, cutting an 87 in path over an 80 in rotor with 42 heavy F7000 flail teeth in...

View full details
Original price $9,287.00 - Original price $9,287.00
Original price
$9,287.00
$9,287.00 - $9,287.00
Current price $9,287.00

FMP260 Flail Mower | Baumalight

Baumalight
Original price $5,654.00 - Original price $5,794.00
Original price
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
Current price $5,654.00

The Baumalight FMP260 is a three-point-hitch flail mower for compact tractors, cutting a 72 in path over a 60 in rotor with 30 free-swinging flail ...

View full details
Original price $5,654.00 - Original price $5,794.00
Original price
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
Current price $5,654.00

KR65 65 kW PTO Generator | Baumalight

Baumalight
Original price $13,997.00 - Original price $15,497.00
Original price
$13,997.00 - $15,497.00
$13,997.00 - $15,497.00
Current price $13,997.00

The Baumalight KR65 is a 65 kW tractor-driven PTO generator for a tractor of 97 horsepower at full load, the largest of the four KR models. It ship...

View full details
Original price $13,997.00 - Original price $15,497.00
Original price
$13,997.00 - $15,497.00
$13,997.00 - $15,497.00
Current price $13,997.00

KR52 52 kW PTO Generator | Baumalight

Baumalight
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

The Baumalight KR52 is a 52 kW tractor-driven PTO generator for a tractor of 76 horsepower at full load, the third of the four KR models. It ships ...

View full details
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

KR44 44 kW PTO Generator | Baumalight

Baumalight
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

The Baumalight KR44 is a 44 kW tractor-driven PTO generator for a tractor of 65 horsepower at full load, the second of the four KR models. It ships...

View full details
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare