Skid Steer Attachments

Storm box snow pusher, 4 ft to 7 ft widths, with a fully enclosed 10 ga 27" moldboard, reinforced 30" side extensions, and 5" x 1/4" shoes. Replace...

The Baumalight TN548 is a 500 series trencher on a universal skid steer plate for 3,000 to 7,000 lb skid steers, digging 48 in deep and 6, 8 or 10 ...

The Baumalight TNS536 is a 500 series trencher on the universal skidsteer mount for 3,000 to 7,000 lb skid steers, digging 36 in deep and 6, 8 or 1...

The Baumalight TN760 is the 700 series trencher for high flow skid steers of 4,000 to 12,000 lb, digging 60 in deep and 6, 8 or 10 in wide by chain...

The Baumalight TN560 is a 500 series trencher on a universal skid steer plate for 3,000 to 7,000 lb skid steers, digging 60 in deep and 6, 8 or 10 ...

The Baumalight TNS336 is a 300 series trencher on a universal skid steer plate for 2,000 to 5,000 lb skid steers, digging 36 in deep and 4 or 6 in ...

HitchDoc Push-Off Bucket, 68 in, 72 in and 84 in widths, a skid steer ejector bucket whose hydraulically powered extractor blade pushes the load ou...

The Eterra Telescopic Auger Extension is an adjustable 72 inch auger extension for 2 inch hex output shafts. A pin slides the auger hub to a new ho...

The Eterra Stinger Spiral Splitter converts an auger drive into a log splitter. Its specialized spiral amplifies splitting force so less effort is ...

Eterra Hex Auger Extensions add depth to an auger setup. They are fixed-length extensions on a 2 inch hex in and out, built with wave pattern welds...

The Eterra Auger Stump Planer turns an auger drive into a stump removal tool. It fits a 2 inch hex output, carries three replaceable and re-sharpen...

Eterra Auger Adapters join an auger drive to a bit, extension or accessory whose shaft type does not match. They are offered in five connection sty...

The Eterra Cement Mixer Bowl is a mixing bowl driven by an Eterra auger drive. It mounts through a 2 inch hex coupler at the base of the bowl and i...

Eterra Earth Auger Bits are 2 inch hex drive auger bits for skid steer and mini skid steer auger drives. They run 48 inches long in diameters from ...

The Star Industries Skid Steer Trash Hopper attaches directly to the loader for waste and loose material handling, in 48 in, 72 in and 84 in widths...

The Star Industries Skid Steer Power Rake is a 72 in bi-directional carbide-tooth drum on a floating frame, with the drive motor set inside the dru...

The Star Industries Skid Steer Grapple Bucket is a solid-bottom bucket with two independently operating grapple arms, opening 38-1/2 in on Heavy Du...

The Star Industries Skid Steer Brush Cutter is a 72 in open-front cutter running three bi-directional 5/8 in AR400 blades on a high torque motor an...

The Star Industries Root Grapple Bucket handles brush, logs and rock with independently operating hydraulic cylinders and a separated tine bottom t...

The Star Industries Trailer Spotter puts a standard 2 in square hitch receiver on a skid steer, so a yard can move trailers and trailer-mounted equ...

The Star Industries Skid Steer Concrete Placement Bucket carries and places concrete where a truck chute will not reach. No moving parts and no gat...

The Star Industries Heavy Duty Skid Steer Bucket is a low profile dirt bucket in five widths from 60 in to 84 in, 15.0 to 21.0 cubic feet heaped, w...

The Star Industries Extreme Duty Skid-Steer Bucket is built around a 25 percent heavier shell, an AR400 heel plate and AR400 wear bars, with a 1 in...

The Baumalight ISH3P is a skid steer tree puller with a hydraulic jaw, gripping stems up to 4 in in diameter and lifting them out of the ground wit...