Concrete Saws & Cutting

The top of the three grades published on the small-diameter concrete blade line, in ten configurations from 4 in through 8 in. High diamond concent...

The Supreme grade of the small-diameter concrete blade line is a high diamond concentration blade for concrete and masonry, in twenty configuration...

The Premium Dos Seggie is a laser welded multipurpose blade for concrete, asphalt and pipe, in five configurations from 12 to 18 in. The 14 in size...

The upper of the two grades U.S. Saws publishes for cured concrete is a wet cut blade with higher diamond content and added undercut protection, in...

The professional grade of the Asphalt and Green Concrete line is a medium bond laser welded blade with high diamond concentration, published in twe...

The V Blade is a crack chasing and joint clean-out blade with V shaped laser welded segments, published in 4, 4.5, 5, 6 and 8 in at .250 in and .37...

The Blue Series is the .187 in Tiger Tooth built for joint restoration, published in 8 and 10 in. Large grit mills out old polyurea and epoxy while...

The Stone Fire is a turbo rim blade bonded for hard stone, published in 4 and 4.5 in at .100 in on a 7/8 in arbor with a 5/8 in bushing. The bond i...

The Standard grade of the Cured Concrete line is a medium bond laser welded wet cutting blade, published in 14, 20 and 24 in on a 1 in arbor. It is...

The Jumbo Segment is a multipurpose concrete blade with tall stepped segments, published at 14 in x .125 in on a 1 in arbor with a 20 mm bushing. C...

The Flush Cut blade mounts on a six bolt flange rather than an arbor, so a flush cut saw can bring the rim right up against a wall, curb or drivewa...

The diamond router bit is a shank-mounted diamond tip for tuckpointing and shaping mortar, masonry and stone. Two are published: a 1/4 in cylindric...

The Colonel Concrete is a laser welded turbo segment blade for cured concrete, published in 12, 14, 16, 18 and 20 in. Thickness steps up with diame...

The Tiger Tooth II is a vacuum brazed diamond blade built on a one-piece core with no welds, published in 12 and 14 in. Both sizes carry a 20 mm so...

The Lieutenant is a diamond blade for cutting concrete and asphalt, in three diameters from 12 to 16 in. All three sizes carry a 1 in arbor with a ...

The Pipe Piranha is a diamond blade built for cutting pipe, in four configurations from 12 to 16 in. It cuts ductile iron, plastic and clay pipe, a...

The Major Asphalt is a diamond blade engineered specifically for cutting asphalt, in six sizes from 12 to 20 in. It also cuts asphalt over concrete...

The Dos Seggie is a multipurpose diamond blade for concrete, asphalt and pipe, in four configurations from 12 to 16 in. The 14 in size is published...

The Black Ops is a low-cost general purpose diamond blade for cutting concrete, in three configurations at 12 and 14 in. The 14 in size is publishe...

The Hydraulic Hand-Held Saw is a fully welded aluminum-frame cut-off saw driven by a hydraulic motor on 12 GPM at 2,500 PSI, in three sizes cutting...

The Big Belly Saw straps to large-diameter pipe and guides around the barrel for straight, controlled cuts, in two strap ranges covering 24 to 48 i...

The ACH-GB is a gearbox-driven air chainsaw for cutting pipe and concrete structures, running on 90 CFM at 90 PSI with no engine exhaust and no kic...

The Mark-IV Dust Buggy is an electric walk-behind saw for cleaning out control joints, removing old joint filler, and making straight cuts in concr...

The JS-160P is a certified-propane walk-behind joint clean-out saw that mills existing control joints for new fill or removes failed polyurea, epox...