Skid Steer Digging & Excavation

The Baumalight TN548 is a 500 series trencher on a universal skid steer plate for 3,000 to 7,000 lb skid steers, digging 48 in deep and 6, 8 or 10 ...

The Baumalight TNS536 is a 500 series trencher on the universal skidsteer mount for 3,000 to 7,000 lb skid steers, digging 36 in deep and 6, 8 or 1...

The Baumalight TN760 is the 700 series trencher for high flow skid steers of 4,000 to 12,000 lb, digging 60 in deep and 6, 8 or 10 in wide by chain...

The Baumalight TN560 is a 500 series trencher on a universal skid steer plate for 3,000 to 7,000 lb skid steers, digging 60 in deep and 6, 8 or 10 ...

The Baumalight TNS336 is a 300 series trencher on a universal skid steer plate for 2,000 to 5,000 lb skid steers, digging 36 in deep and 4 or 6 in ...

Glacier fixed-boom backhoe attachment for skid steers and compact track loaders, digging to 8.5 ft on a 45 in overall width. Built on a 1/2 in quic...

The Star Industries Slab Eater is a concrete claw for skid steers that prys, cuts, tears, and rips through concrete slabs and general demolition ma...

The Star Industries Extreme Duty Post Driver drives fence posts, guard rails, sign posts, and agricultural supports with 1,000 ft-lbs of impact ene...

The Star Industries Skid Steer Breaker is a hydraulic hammer that cracks and pulverizes concrete, asphalt, and rock for demolition, mining, and qua...

The Star Industries Skid Steer Trencher digs trenches through dirt, rock, and frost for utility, irrigation, and drainage work, available with a di...

The Eterra PDX-1000 is a breaker-style, nitrogen-charged post driver for skid steers, built for fencing contractors. It drives wood and steel posts...

The Eterra Auger Drive is a hydraulic powerhead for skid steers that turns a 2-inch hex bit to bore holes for posts, footings, and decks, available...

The Eterra Telescopic Auger Extension is an adjustable 72 inch auger extension for 2 inch hex output shafts. A pin slides the auger hub to a new ho...

The Eterra Stinger Spiral Splitter converts an auger drive into a log splitter. Its specialized spiral amplifies splitting force so less effort is ...

Eterra Hex Auger Extensions add depth to an auger setup. They are fixed-length extensions on a 2 inch hex in and out, built with wave pattern welds...

Eterra Earth Auger Bits are 2 inch hex drive auger bits for skid steer and mini skid steer auger drives. They run 48 inches long in diameters from ...

The Eterra Cement Mixer Bowl is a mixing bowl driven by an Eterra auger drive. It mounts through a 2 inch hex coupler at the base of the bowl and i...

The Eterra Auger Stump Planer turns an auger drive into a stump removal tool. It fits a 2 inch hex output, carries three replaceable and re-sharpen...

Glacier hydraulic auger drive for skid steers, compact track loaders, and mini skid steers, with a 2 in hex output and a direct planetary drive. Th...

Eterra Auger Adapters join an auger drive to a bit, extension or accessory whose shaft type does not match. They are offered in five connection sty...