Mini Skid Steer Attachments

The Baumalight TNM336B is the 36 in mini trencher on a Bobcat mini skid steer plate, for 1,500 to 4,000 lb Bobcat mini skid steers, digging 36 in d...

The Baumalight TN236 is a 200 series trencher for 1,500 to 4,000 lb mini skid steers and mini track loaders, digging 36 in deep and 4 or 6 in wide ...

The Eterra Telescopic Auger Extension is an adjustable 72 inch auger extension for 2 inch hex output shafts. A pin slides the auger hub to a new ho...

The Eterra Stinger Spiral Splitter converts an auger drive into a log splitter. Its specialized spiral amplifies splitting force so less effort is ...

Eterra Hex Auger Extensions add depth to an auger setup. They are fixed-length extensions on a 2 inch hex in and out, built with wave pattern welds...

The Eterra Auger Stump Planer turns an auger drive into a stump removal tool. It fits a 2 inch hex output, carries three replaceable and re-sharpen...

Eterra Auger Adapters join an auger drive to a bit, extension or accessory whose shaft type does not match. They are offered in five connection sty...

The Eterra Cement Mixer Bowl is a mixing bowl driven by an Eterra auger drive. It mounts through a 2 inch hex coupler at the base of the bowl and i...

Eterra Earth Auger Bits are 2 inch hex drive auger bits for skid steer and mini skid steer auger drives. They run 48 inches long in diameters from ...

The Eterra E40 Mini Skid Steer Backhoe is a fixed 4 foot boom backhoe attachment for mini skid steers. It digs to 48 inches with a 52 inch overall ...

The Eterra Mini Skid Steer Sickle Bar Mower cuts grass, brush and standing vegetation with a scissor action rather than a rotor. A 5 ft cutter bar ...

The Eterra Mini Skid Steer Auger Drive turns a mini skid steer into a post hole driller. It is a hydraulic auger drive with a 2 in hex output shaft...

The Baumalight ISH3M is a mini skid steer tree puller with a hydraulic jaw, gripping saplings up to 2 in in diameter and lifting them out of the gr...

The Baumalight S16 is a mini skid steer stump grinder with an electrically actuated swing, so the whole hydraulic flow of the carrier goes to the r...

The Baumalight MS530M is a fixed-tooth brush mulcher for standard mini skid steers, running a 42 in path and a 30 in rotor with 44 carbide-tipped b...

The Baumalight FMM148 is a hydraulic flail mower for mini skid steers, cutting a 61 in path over a 48 in rotor with 30 free-swinging flail teeth of...

Arrow Mini Skid Steer Buckets for walk-behind and mini track loaders, in four widths on a mini universal or Bobcat mount. Quarter inch shell and en...

HitchDoc mini skid steer V-blade, 4 ft and 5 ft widths, 22 in tall, with manually adjustable wings for scoop, V-cut, straight or angled work. Unive...

HitchDoc mini skid steer angle blade, 4 ft and 5 ft widths, 22 in tall, angling 30 degrees left or right on a double-acting cylinder with quick con...

The Eterra Sidewinder is a flail mower for mini skid steers. An open-face, deep cutter housing and 20 one-pound Y-knife blades cut grass and tangle...

The Eterra Hurricane Mini Skid Steer Concrete Mixer is a hydraulic drum mixer for mini skid steers. It mixes 3.53 cu ft of material behind a heavy-...

Glacier tree puller for skid steers, compact track loaders, and mini skid steers, removing trees, shrubs, and brush up to 12 in in diameter. Three ...

Storm blank mounting plate that turns a fabricated or unmounted implement into a quick-attach attachment for a skid steer, compact track loader, mi...

Glacier land plane for skid steers, compact track loaders, and mini skid steers, grading in both forward and reverse on dual 3/4 in boron steel cut...