Skip to content
American Quality | Freight Delivered Nationwide | U.S. Based Support
American Quality | Freight Delivered Nationwide | U.S. Based Support

Hydraulic Hand-Held Saw | U.S. Saws

Brand U.S. SawsSKU US-HS160H
Original price $3,235.67 - Original price $3,413.29
Original price
$3,235.67
$3,235.67 - $3,413.29
Current price $3,235.67
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Hydraulic Hand-Held Saw is a fully welded aluminum-frame cut-off saw driven by a hydraulic motor on 12 GPM at 2,500 PSI, in three sizes cutting 5, 8, and 10 in deep. A dual-position front handle and a protected water valve and manifold block set it up for wet cutting on utility work.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

For an order containing products from a single brand, shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000 to $10,000: $347
  • Orders $10,000 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Ordering from more than one brand? Multi-brand orders ship on separate freight and are quoted individually rather than at the flat rate above. Place your order or contact us first and we will confirm total freight before anything is finalized.

Liftgate service is not included in these rates. If your delivery location has no loading dock or forklift to unload the freight from the truck, liftgate service is required and will be added to your shipping charge. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 22 to 31 lbs by size
  • Drive: hydraulic motor
  • Hydraulic Flow: 12 GPM
  • Hydraulic Pressure: 2,500 PSI
  • Max Depth of Cut: 5 in (16 in size), 8 in (21 in size), 10 in (24 in size)
  • Frame: fully welded aluminum, powder coated


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Hydraulic Hand-Held Saw makes deep cuts in pipe, concrete, and utility structures from a hydraulic circuit, with no engine on the saw and no exhaust at the cut. All three sizes share one platform: the same hydraulic motor spec, the same welded frame, different blade capacity.

The frame is fully welded aluminum under powder coat, and the oversized dual-position front handle gives the operator two grips for horizontal and vertical cuts. The water shut-off valve and manifold block sit positioned out of harm's way, so the wet-cut plumbing survives the drops and drags of trench work. The hydraulic motor delivers blade speed and torque steadily under load, and U.S. Saws fits motors to match the power pack driving the saw. This is the deep-cut handsaw for utility crews that already run hydraulic circuits and need cuts past what a gas cut-off saw reaches.

Common Applications

  • Deep cutting of pipe and concrete on utility work
  • Wet cutting in trenches and structures
  • Cut-off work beyond gas-saw depth from a hydraulic circuit

Selection Notes

  • Choose by depth of cut: 5 in on the 16 in saw, 8 in on the 21 in saw, 10 in on the 24 in saw
  • Runs on the same 12 GPM at 2,500 PSI band as the FSB-150H walk-behind; one power pack drives both
  • Motor fitment varies with power pack engine and pump sizing; confirm the circuit at ordering
Unit Specifications
Drive
Hydraulic motor
Hydraulic flow
12 GPM
Hydraulic pressure
2,500 PSI
Motor fitment
Motors vary with power pack engine and pump sizes
Build
Frame
Fully welded aluminum, powder coated
Handle
Oversized dual-position front handle
Water valve
Shut-off valve and manifold block positioned clear of impact damage
SizeBlade DiameterMax Depth of CutWeight
16 in 16 in (406 mm) 5 in (127 mm) 22 lb (10 kg)
21 in 20 in (508 mm) 8 in (203 mm) 26 lb (12 kg)
24 in 24 in (610 mm) 10 in (254 mm) 31 lb (14 kg)
Welded aluminum frame
Deep-cut capacity at hand-saw weight, 31 pounds at the heaviest
Dual-position front handle
A proper grip in both horizontal and vertical cuts
Protected wet-cut plumbing
The water valve and manifold survive trench handling

Included with Purchase

  • 1 Hydraulic Hand-Held Saw (variant/model as ordered)

Not Included Unless Stated

  • Hydraulic power pack and hoses
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

HS Hand-Held Air Saw | U.S. Saws

U.S. Saws
Original price $2,610.00 - Original price $2,705.80
Original price
$2,610.00 - $2,705.80
$2,610.00 - $2,705.80
Current price $2,610.00

The HS Hand-Held Air Saw is a direct-drive cut-off saw that runs on 90 CFM at 90 PSI shop air instead of a gas engine, in two sizes: the HS-125 wit...

View full details
Original price $2,610.00 - Original price $2,705.80
Original price
$2,610.00 - $2,705.80
$2,610.00 - $2,705.80
Current price $2,610.00

Premium Dos Seggie Blade | U.S. Saws

U.S. Saws
Original price $211.70 - Original price $440.10
Original price
$211.70 - $440.10
$211.70 - $440.10
Current price $211.70

The Premium Dos Seggie is a laser welded multipurpose blade for concrete, asphalt and pipe, in five configurations from 12 to 18 in. The 14 in size...

View full details
Original price $211.70 - Original price $440.10
Original price
$211.70 - $440.10
$211.70 - $440.10
Current price $211.70

Premium Concrete Blade | U.S. Saws

U.S. Saws
Original price $53.80 - Original price $263.30
Original price
$53.80 - $263.30
$53.80 - $263.30
Current price $53.80

The top of the three grades published on the small-diameter concrete blade line, in ten configurations from 4 in through 8 in. High diamond concent...

View full details
Original price $53.80 - Original price $263.30
Original price
$53.80 - $263.30
$53.80 - $263.30
Current price $53.80

Pipe Piranha Blade | U.S. Saws

U.S. Saws
Original price $270.80 - Original price $401.70
Original price
$270.80 - $401.70
$270.80 - $401.70
Current price $270.80

The Pipe Piranha is a diamond blade built for cutting pipe, in four configurations from 12 to 16 in. It cuts ductile iron, plastic and clay pipe, a...

View full details
Original price $270.80 - Original price $401.70
Original price
$270.80 - $401.70
$270.80 - $401.70
Current price $270.80

Mark-IV Dust Buggy Joint Clean-Out Saw | U.S. Saws

U.S. Saws
Original price $2,042.50 - Original price $2,042.50
Original price
$2,042.50
$2,042.50 - $2,042.50
Current price $2,042.50

The Mark-IV Dust Buggy is an electric walk-behind saw for cleaning out control joints, removing old joint filler, and making straight cuts in concr...

View full details
Original price $2,042.50 - Original price $2,042.50
Original price
$2,042.50
$2,042.50 - $2,042.50
Current price $2,042.50

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare