Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support

MP572 Brush Mulcher | Baumalight

Brand BaumalightSKU MP572-540
Original price $18,897.00 - Original price $20,497.00
Original price
$20,197.00
$18,897.00 - $20,497.00
Current price $20,197.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Baumalight MP572 is a 500 Series fixed-tooth mulcher for three-point hitch tractors, with an 87 in path and a 72 in rotor carrying 112 bolt-in carbide teeth. It weighs 2,500 lb, cuts from 1.5 in above to 1 in below grade, and is ordered with either a 540 or a 1,000 rpm gearbox on a CAT 2 hitch.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 2,500 lb
  • Path Width: 87 in
  • Rotor Width: 72 in
  • Rotor Diameter: 15 in at the tool tips
  • Rotor Weight: 700 lb with tools
  • Number of Cutters: 112
  • Tooth Part Number: P5000
  • Cutting Style: Carbide tipped bolt in

Fitment / Machine Requirements

  • Hitch Size: CAT 2
  • Quick Hitch Compatible: No
  • Minimum Engine Horsepower: 50
  • Maximum Engine Horsepower: 125 at 540 rpm, 135 at 1,000 rpm
  • Maximum PTO Horsepower: 115 at 540 rpm, 125 at 1,000 rpm
  • Gearbox Spline Size: 1-3/8 in
  • Tractor End Spline Size: 1-3/8 in
  • Cutting Depth: 1.5 in above to 1 in below grade
  • System Protection: Slip clutch
  • Tractor Remotes Required: 1


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The MP572 is the widest 500 Series head and the one built for tractors that have power to spare. It is offered on two gearboxes, and that choice is the real decision here: the faster build takes a higher horsepower ceiling, while the slower one suits the tractors most crews already own. The faster build also takes a heavier PTO shaft that the slower one cannot.

Rotor width goes to 72 in and the tooth count to 112, which is the highest in the whole brush mulcher line, so the cut stays fine across the full swath. Teeth are bolt-in, in planer or ripper style, and both change in the field. The door works off a single tractor remote, so an operator holds material in for a finer finish or lets it through when speed matters more.

Common Applications

  • Land clearing and reclamation behind a high horsepower tractor
  • Fence line and right-of-way work over long runs
  • Below-grade cutting on stumps and root collars
  • Production clearing where swath width sets the day rate

Selection Notes

  • Pick the gearbox first. The 1,000 rpm build carries a higher horsepower ceiling; the 540 rpm build matches the more common tractor output.
  • The 540 rpm build is the more expensive of the two.
  • The 1,000 rpm build can be ordered with the D002134 shaft upgrade, which the supplier lists as a 1,000 rpm 200 hp mulcher PTO shaft update with a 1.75 in 20-spline end. It is offered on the 1,000 rpm gearbox only, so the 540 rpm build cannot take it. Read it as a heavier driveline part rather than as a higher rating for the head.
  • The hitch is CAT 2 and is not quick hitch compatible.
  • One tractor remote is required to work the door. Confirm the tractor has one before ordering.
  • Units ship with P5000 planer teeth fitted. Ripper teeth are the alternative style for below-grade work and in stony ground, and both styles are bolt-in.
  • Read the brush chart below against the tractor's horsepower and transmission. This model is charted in four horsepower columns of its own, and they are the complement of the MP560's on the same table, which is why the 500 Series chart has to be read per model rather than per series.
Mount & Interface
Hitch size
CAT 2
Quick hitch compatibility
No
Gearbox spline size
1-3/8 in (35 mm)
Tractor end spline size
1-3/8 in (35 mm)
Cutting Capacity
Path width
87 in (2,210 mm)
Rotor width
72 in (1,829 mm)
Cutting depth
1.5 in (38 mm) above to 1 in (25 mm) below grade
Rotor & Teeth
Rotor diameter at tool tips
15 in (381 mm)
Rotor shaft size
2 in (51 mm)
Rotor weight with tools
700 lb (318 kg)
Number of cutters
112
Cutting style
Carbide tipped bolt in
Tooth part number
P5000
System protection
Slip clutch
Hydraulics
Tractor remotes required
1
Hydraulic flow and pressure
1 remote, no figure charted
Machine Notes
Minimum engine HP
50
Maximum engine HP at 540 rpm
125
Maximum engine HP at 1000 rpm
135
Maximum PTO HP at 540 rpm
115
Maximum PTO HP at 1000 rpm
125
Drive speed options
540 rpm or 1,000 rpm gearbox
Brush Capacity, Low Gear
Tractor transmission
Geared, low gear or creeper
Brush Capacity, Hydrostatic
Tractor transmission
Hydrostatic
Dimensions & Weights
Unit weight
2,500 lb (1,134 kg)
Freight weight by part number
MP572-540 2,575 lb, MP572-1000 2,575 lb
Shipping size, MP572-540
89 x 50 x 61 in (2,261 x 1,270 x 1,549 mm)
Shipping size, MP572-1000
89 x 50 x 58 in (2,261 x 1,270 x 1,473 mm)
Dimensional weight, MP572-540
1,636 lb (742 kg)
Dimensional weight, MP572-1000
1,555 lb (705 kg)
Brush Capacity, Low Gear: Maximum brush cutting sizes, brush diameter in inches
Technique65 HP75 HP100 HP125 HP
Rotor speed1,800 rpm1,800 rpm1,800 rpm1,800 rpm
Low gear2.5 in3 in3.5 in4 in
Creeper4 in5 in6 in7 in
Brush Capacity, Hydrostatic: Maximum brush cutting sizes, brush diameter in inches
Technique65 HP75 HP100 HP125 HP
Rotor speed1,800 rpm1,800 rpm1,800 rpm1,800 rpm
Hydrostatic6 in8 in10 in12 in
112 bolt-in carbide teeth
The highest tooth count in the line, so the cut stays fine across the full swath
Two gearbox speeds on one frame
The head is matched to the tractor's output rather than the tractor to the head
Cuts to 1 in below grade
Takes stumps and root collars down rather than leaving them to resprout
Operator-controlled front door
Hold material in for a finer finish or let it through for speed, from the seat

Included with Purchase

  • 1 MP572 Brush Mulcher with the selected gearbox
  • P5000 planer teeth fitted
  • 6 replacement teeth matching the fitted tooth option, shipped in an enclosed compartment on top of the frame
  • 1 free replacement belt, mounted on the unit in its built-in belt storage bay
  • Slip clutch driveline protection

Not Included Unless Stated

  • Power take-off driveshaft
  • Ripper style teeth
  • Tractor
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

FMP780 Flail Mower | Baumalight

Baumalight
Original price $9,287.00 - Original price $9,287.00
Original price
$9,287.00
$9,287.00 - $9,287.00
Current price $9,287.00

The Baumalight FMP780 is a three-point-hitch flail mower for tractors, cutting an 87 in path over an 80 in rotor with 42 heavy F7000 flail teeth in...

View full details
Original price $9,287.00 - Original price $9,287.00
Original price
$9,287.00
$9,287.00 - $9,287.00
Current price $9,287.00

FMP260 Flail Mower | Baumalight

Baumalight
Original price $5,654.00 - Original price $5,794.00
Original price
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
Current price $5,654.00

The Baumalight FMP260 is a three-point-hitch flail mower for compact tractors, cutting a 72 in path over a 60 in rotor with 30 free-swinging flail ...

View full details
Original price $5,654.00 - Original price $5,794.00
Original price
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
Current price $5,654.00

KR65 65 kW PTO Generator | Baumalight

Baumalight
Original price $13,997.00 - Original price $15,497.00
Original price
$13,997.00 - $15,497.00
$13,997.00 - $15,497.00
Current price $13,997.00

The Baumalight KR65 is a 65 kW tractor-driven PTO generator for a tractor of 97 horsepower at full load, the largest of the four KR models. It ship...

View full details
Original price $13,997.00 - Original price $15,497.00
Original price
$13,997.00 - $15,497.00
$13,997.00 - $15,497.00
Current price $13,997.00

KR52 52 kW PTO Generator | Baumalight

Baumalight
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

The Baumalight KR52 is a 52 kW tractor-driven PTO generator for a tractor of 76 horsepower at full load, the third of the four KR models. It ships ...

View full details
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

KR44 44 kW PTO Generator | Baumalight

Baumalight
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

The Baumalight KR44 is a 44 kW tractor-driven PTO generator for a tractor of 65 horsepower at full load, the second of the four KR models. It ships...

View full details
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare