Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support

HG Series Hot Water Pressure Washer | Mi-T-M

Brand Mi-T-MSKU HG-3004-1208G1
Original price $14,230.00 - Original price $15,200.00
Original price
$14,730.00
$14,230.00 - $15,200.00
Current price $14,730.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Mi-T-M HG Series is a stationary natural gas or LP hot water pressure washer for a fixed wash bay, running off a building gas supply instead of a fuel tank. All models run 3000 psi at 3.9 or 4.8 gpm on a belt-drive triplex pump, with a programmable controller for continuous duty.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Type: Natural gas or LP hot water pressure washer, belt drive, stationary
  • Pressure: 3000 psi
  • Flow: 3.9 or 4.8 gpm by model
  • Motor: 8.0 or 10.0 HP, 208V to 575V, single-phase or three-phase by model
  • Pump: General belt-drive triplex with ceramic plungers
  • Heat: Schedule 80 pipe-coil heat exchanger; natural gas 338,000 or LP 326,000 BTU per hour
  • Temperature rise: 150 degrees F above ambient, up to 200 degrees F outlet
  • Warranty: Electric motor (term not stated on the sheet)
  • Net Weight: 758 lb


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Mi-T-M HG Series is a stationary natural gas or LP hot water pressure washer that runs off a building gas supply instead of a fuel tank to refill. It is built for a wash bay that draws on a steady gas line rather than refilling a tank between jobs.

A belt-drive triplex pump with ceramic plungers and a schedule 80 pipe-coil heat exchanger, backed by a programmable controller for auto start/stop and safety lockout, are built for continuous duty. It comes in two flow tiers, each wired for a specific shop voltage from 208V to 575V, single-phase or three-phase, so the model matches the electrical service on site as much as the flow needed. This is for a wash bay that runs hot water every day, not the occasional wash.

Common Applications

  • Continuous hot-water cleaning in a fixed wash bay
  • Facility washdown off a building gas supply
  • Permanent-install cleaning where a gas line is available

Selection Notes

  • Two flow tiers at 3000 psi: the HG-3004 models at 3.9 gpm with an 8.0 HP motor, or the HG-3005 models at 4.8 gpm with a 10.0 HP motor.
  • Match the model to your shop power: 208V, 230V, 460V, or 575V, single-phase or three-phase (see the model table for amperage). All models are wired for a permanent install.
  • The burner runs on natural gas or LP, vapor only; an LP conversion (HX-0105) and a 250 degrees F steam option are available. Plan the gas supply line and clearances per the install requirements.
Build
Frame
Powder-coated steel frame
Motor
Open drip-proof electric motor
Pump
Belt-drive triplex piston pump with ceramic plungers and a factory preset unloader
Heat exchanger
1/2 in schedule 80 pipe-coil heat exchanger
Burner
Natural gas or LP gas-fired (vapor only) natural-draft aspirating burner with a 10 in stack and 10 in draft diverter; 338,000 BTU per hour on natural gas, 326,000 BTU per hour on LP
Water tank
4-gallon polyethylene float tank with an inlet filter screen
Controls
24V control system with a programmable logic controller for auto start/stop and timed lockout; electronic ignition with standing pilot light; pressure switch and over-pressure safety controls; adjustable thermostat; hour meter
Detergent injector
Adjustable high-pressure detergent injector
Relief valve
Thermal relief valve
Country of origin
Made in USA with globally sourced components
Unit Specifications
Water temperature
Hot water; temperature rise 150 degrees F (66 degrees C) above ambient, maximum 200 degrees F outlet (250 degrees F outlet with the steam option)
Drive type
Belt drive
Gas supply
Natural gas 7 to 8 in water column input, or LP 12 to 14 in water column input; the unit needs 2 ft of clearance on all sides and 4 ft above; gas supply pipe size depends on the run length, consult the install requirements
Certification
ETL Certified for the United States and Canada
Warranty
Electric motor warranty; the term and any pump or coil warranty are not stated, confirm with supplier
Models
ModelFlowMotorNet Weight
HG-3004-1208G13.9 gpm8.0 HP, 208V, 1-phase, 40.5A758 lb (344 kg)
HG-3004-3208G13.9 gpm8.0 HP, 208V, 3-phase, 23.0A758 lb (344 kg)
HG-3004-1230G13.9 gpm8.0 HP, 230V, 1-phase, 37.0A758 lb (344 kg)
HG-3004-3230G13.9 gpm8.0 HP, 230V, 3-phase, 20.0A758 lb (344 kg)
HG-3004-3460G13.9 gpm8.0 HP, 460V, 3-phase, 10.0A758 lb (344 kg)
HG-3005-1208G14.8 gpm10.0 HP, 208V, 1-phase, 48.7A758 lb (344 kg)
HG-3005-3208G14.8 gpm10.0 HP, 208V, 3-phase, 29.0A758 lb (344 kg)
HG-3005-1230G14.8 gpm10.0 HP, 230V, 1-phase, 44.0A758 lb (344 kg)
HG-3005-3230G14.8 gpm10.0 HP, 230V, 3-phase, 25.0A758 lb (344 kg)
HG-3005-3460G14.8 gpm10.0 HP, 460V, 3-phase, 12.5A758 lb (344 kg)
HG-3005-3575G14.8 gpm10.0 HP, 575V, 3-phase, 10.0A758 lb (344 kg)
Dimensions and Weights
SpecificationValue
Overall dimensions L x W x H56.5 x 29 x 49.75 in (1435 x 737 x 1264 mm)
Ship weight878 lb (398 kg)
Net weight758 lb (344 kg)
Building gas supply
Runs off a natural gas or LP line, no burner fuel tank to refill
Programmable controller
Auto start/stop and safety lockout for continuous wash-bay duty

Included with Purchase

  • 1 Mi-T-M HG Series Hot Water Pressure Washer (variant/model as ordered)
  • Quick connect nozzles: 0 degree, 15 degree, 25 degree, and 40 degree, and a fixed detergent nozzle
  • 50-foot x 3/8-inch steel wire-braided high-pressure hose with quick connects
  • Adjustable-pressure insulated dual lance with trigger gun

Not Included Unless Stated

  • Gas supply line, electrical service and hookup, and mounting; remotes, LP conversion (HX-0105), steam option, and detergent solenoid (available separately)
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

HSE Series Hot Water Pressure Washer | Mi-T-M

Mi-T-M
Original price $6,415.00 - Original price $13,071.00
Original price
$6,415.00 - $13,071.00
$6,415.00 - $13,071.00
Current price $6,415.00

The Mi-T-M HSE Series is a portable electric hot water pressure washer built for melting away greasy residue and debris on construction sites, farm...

View full details
Original price $6,415.00 - Original price $13,071.00
Original price
$6,415.00 - $13,071.00
$6,415.00 - $13,071.00
Current price $6,415.00

HAE Series Hot Water Pressure Washer | Mi-T-M

Mi-T-M
Original price $19,403.00 - Original price $24,865.00
Original price
$19,403.00 - $24,865.00
$19,403.00 - $24,865.00
Current price $19,403.00

The Mi-T-M HAE Series is an all-electric hot water pressure washer for a permanent installation, heating water with an electric element instead of ...

View full details
Original price $19,403.00 - Original price $24,865.00
Original price
$19,403.00 - $24,865.00
$19,403.00 - $24,865.00
Current price $19,403.00

JP Series Electric Pressure Washer | Mi-T-M

Mi-T-M
Original price $2,194.00 - Original price $5,714.00
Original price
$2,194.00 - $5,714.00
$2,194.00 - $5,714.00
Current price $2,194.00

The Mi-T-M JP Series Electric is a portable electric cold-water pressure washer built to take indoors, where engine exhaust is not an option. Model...

View full details
Original price $2,194.00 - Original price $5,714.00
Original price
$2,194.00 - $5,714.00
$2,194.00 - $5,714.00
Current price $2,194.00

CW Premium Series Electric Pressure Washer | Mi-T-M

Mi-T-M
Original price $6,392.00 - Original price $10,789.00
Original price
$6,392.00 - $10,789.00
$6,392.00 - $10,789.00
Current price $6,392.00

The Mi-T-M CW Premium Series Electric is a belt-drive electric pressure washer for cleaning equipment, floors, and walls inside commercial faciliti...

View full details
Original price $6,392.00 - Original price $10,789.00
Original price
$6,392.00 - $10,789.00
$6,392.00 - $10,789.00
Current price $6,392.00

ChoreMaster Series Electric Pressure Washer | Mi-T-M

Mi-T-M
Original price $1,082.00 - Original price $1,393.00
Original price
$1,082.00 - $1,393.00
$1,082.00 - $1,393.00
Current price $1,082.00

The Mi-T-M ChoreMaster Series Electric is a light-duty electric cold-water pressure washer that runs off a standard 120V outlet. It comes as a hand...

View full details
Original price $1,082.00 - Original price $1,393.00
Original price
$1,082.00 - $1,393.00
$1,082.00 - $1,393.00
Current price $1,082.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare