Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support

KR65 65 kW PTO Generator | Baumalight

Brand BaumalightSKU KR65
Original price $13,997.00 - Original price $15,497.00
Original price
$13,997.00
$13,997.00 - $15,497.00
Current price $13,997.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Baumalight KR65 is a 65 kW tractor-driven PTO generator for a tractor of 97 horsepower at full load, the largest of the four KR models. It ships on its own two-wheel trailer with a fully shielded PTO shaft and a 10 ft cord, runs a four-pole, brushless, copper-wound genset with automatic voltage regulation and the DisplayMaster1 performance monitor, and is offered in twenty cable length, phase configuration and end plug combinations.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Rated output: 65 kW at 100 percent load
  • Momentary surge: 180 kW
  • Voltage: 120/240, single phase
  • PTO speed: 540 rpm
  • Internal speed: 1,800 rpm
  • Number of poles: 4
  • Full output amps at the main breaker: 250 A
  • Voltage regulation: Automatic, within 1 percent from 64 down to 56 Hz
  • Welder receptacle: 240 volt, 50 amp
  • 120 volt 20 amp duplex receptacles: 2

Fitment / Machine Requirements

  • Tractor power at 50 percent load: 52 hp
  • Tractor power at 100 percent load: 97 hp
  • Drive: Tractor PTO at 540 rpm through a fully shielded driveline
  • Mount: Two-wheel trailer with a 5/8 in hitch pin, standard
  • Three-point hitch deck: D001434 for 52 to 105 kW, at added cost in place of the trailer


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The KR65 turns a 97 horsepower tractor into a 65 kW source of standby and remote 120/240 single phase power, which is the whole case for a PTO generator: one less engine to own, fuel, service and start after months of sitting. It is the largest of the four KR models, and it is built for contractors, utility and grounds crews, and service operations that already run a tractor at the top of the KR range and need power at a shop, a yard or a jobsite without buying a second engine to get it.

The genset is a cast-iron, four-pole, brushless alternator on four oversized copper windings, and an oil-filled gearbox steps the PTO input down to an internal speed well below engine speed, which the supplier ties to duty cycle: less friction, heat and wear over a long run. The four windings give momentary surge capacity of up to three times rated power, so a motor starting under load does not drag the voltage down, and automatic voltage regulation holds output within 1 percent from 64 down to 56 Hz. The DisplayMaster1 puts voltage, frequency, amperage, kW, kVA, power factor and run time on one screen beside a three-light over and under speed indicator, and reset circuit breakers clear a surge without hunting for a spare fuse.

Common Applications

  • Standby power for a shop, yard or service building during an outage
  • Remote power at a jobsite from a tractor already on site
  • Running equipment motors and hand tools away from a service
  • Field repairs with a portable welder on the 50 amp welder receptacle

Selection Notes

  • Size the tractor first. The KR65 draws 52 hp at 50 percent load and 97 hp at 100 percent load, and the 100 percent figure governs if the generator will run near its rating.
  • Wire Length is the run from the generator to the service. The supplier ships the KR65 with a 10 ft full power cord and prices its cable by the foot for a longer run, offered at 20, 30, 50 and 100 ft beyond the included 10 ft.
  • Phase Configuration is a cable configuration. The KR65 itself is a 120/240 volt single phase generator, and the supplier's cable for its 55 to 68 kW band is a three-strand 2/0 cable. Confirm the configuration against the service it will feed before ordering.
  • End Plug: the supplier's included cord carries a 175 AMP Anderson connector with four #2 pins, and its 350 AMP Anderson plug carries four 2/0 pins, the gauge of the cable the supplier names for the 55 to 68 kW band this model sits in. The KR65's full output is 250 A at the main breaker.
  • The three point hitch deck is an added-cost option in place of the trailer. The supplier's 52 to 105 kW deck, D001434, spans the KR65; give the model when ordering.
  • Never mount a generator directly onto concrete, rock, metal or soil. The supplier's rubber mount kit, D001478, four isolators to a set, goes under the tires on a concrete pad.
  • The trailer jack, G2107, is a separate part.
Mount & Interface
Mount
Two-wheel trailer, 5/8 in hitch pin
Trailer tires
Pneumatic, on wheel bearings
Trailer finish
Powder coated
Trailer, 18 to 45 kW
G2079, supplied with the generator
Trailer, 52 to 105 kW
G2078, supplied with the generator
Alternative mount
Three point hitch deck, at added cost
Deck, 18 to 45 kW
D001378, in place of the trailer
Deck, 52 to 105 kW
D001434, in place of the trailer
Driveline
Drive
Tractor PTO, 540 rpm
PTO shaft
Fully shielded with guards
PTO shaft, 18 to 31 kW
G2011, supplied with the generator
PTO shaft, 45 kW
G2082, supplied with the generator
PTO shaft, 55 to 75 kW
G2083, supplied with the generator
Gearbox
Oil filled, steps PTO speed to 1,800 rpm
Internal speed
1,800 rpm
Unit Specifications
Rated output
65 kW
Momentary surge
180 kW
Full output amps, main breaker
250 A
Connection
Dedicated
Volts
120/240
Phase
1
Number of poles
4
120 V 20 A duplex receptacles
2
Welder receptacle
240 V, 50 A
Voltage regulation
Automatic, within 1%, 64 down to 56 Hz
Protection & Controls
Monitor
DisplayMaster1
Monitor readout
V, Hz, A, kW, kVA, power factor, run hours
Speed indicator
Three light, over and under speed
Circuit protection
Reset circuit breakers, overload protected
Full load connector
Main outlet with a lockable cover
Build
Genset
Cast iron body, four oversized copper windings
Alternator
Brushless
Cooling
Integrated fans venting front and back
Surge capacity
Up to three times rated power
Enclosure
Drip proof, ventilated at the sides
Neutral
Bonded to ground inside the alternator
Country of build
Assembled in Canada, components made in Europe
Warranty
Limited 2 year / 2,000 hour
Machine Notes
Tractor at 50% load
52 hp
Tractor at 100% load
97 hp
Tractor range, KR series
45 to 97 hp
Accessories
Cable, 18 to 31 kW
E2011, #4, 3 strands, per foot
Cable, 45 kW
E1005, #2, 3 strands, per foot
Cable, 55 to 68 kW
E2023, 2/0, 3 strands, per foot
Spare plug, 175 AMP
E1000, Anderson, four #2 pins
Spare plug, 350 AMP
E1002, Anderson, four 2/0 pins
Rubber mount kit
D001478, four per set
Trailer jack
G2107, separate part
Dimensions & Weights
Ship weight
1,210 lb (549 kg)
Freight weight
1,256 lb (570 kg)
Shipping size
54 x 52 x 47 in (1,372 x 1,321 x 1,194 mm)
Dimensional weight
796 lb (361 kg)
Unit Specifications: KR series, by model
SpecificationKR30KR44KR52KR65
Rated output30 kW44 kW52 kW65 kW
Momentary surge85 kW115 kW140 kW180 kW
Tractor at 50% load23 hp34 hp39 hp52 hp
Tractor at 100% load45 hp65 hp76 hp97 hp
Full output amps, main breaker125 A175 A225 A250 A
Ship weight750 lb (340 kg)990 lb (449 kg)1,060 lb (481 kg)1,210 lb (549 kg)
Four oversized copper windings
Momentary surge of nearly three times rated power, so a motor starting under load does not pull the voltage down
1,800 rpm internal speed
Less friction, heat and wear than running at engine speed, which is what a standby machine is bought for
Automatic voltage regulation
Output holds within 1 percent when the load changes suddenly
DisplayMaster1 monitor
Voltage, frequency, amperage, kW, kVA, power factor and run time read from one screen, with a green light at the right PTO speed
Reset circuit breakers
A surge is cleared by resetting the breaker rather than by finding a spare fuse

Included with Purchase

  • 1 KR65 PTO generator
  • PTO shaft, fully shielded
  • Two-wheel trailer on pneumatic tires
  • 10 ft full power cord with Anderson connector, or the cable length and end plug selected

Not Included Unless Stated

  • Tractor
  • Three point hitch deck, D001434, an added-cost option in place of the trailer
  • Trailer jack, G2107
  • Rubber mount kit for a concrete pad, D001478, four per set
  • Transfer switch, service connection, or electrical permitting
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

KR52 52 kW PTO Generator | Baumalight

Baumalight
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

The Baumalight KR52 is a 52 kW tractor-driven PTO generator for a tractor of 76 horsepower at full load, the third of the four KR models. It ships ...

View full details
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

KR44 44 kW PTO Generator | Baumalight

Baumalight
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

The Baumalight KR44 is a 44 kW tractor-driven PTO generator for a tractor of 65 horsepower at full load, the second of the four KR models. It ships...

View full details
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

KR30 30 kW PTO Generator | Baumalight

Baumalight
Original price $9,397.00 - Original price $10,597.00
Original price
$9,397.00 - $10,597.00
$9,397.00 - $10,597.00
Current price $9,397.00

The Baumalight KR30 is a 30 kW tractor-driven PTO generator for a tractor of 45 horsepower at full load, the smallest of the four KR models. It shi...

View full details
Original price $9,397.00 - Original price $10,597.00
Original price
$9,397.00 - $10,597.00
$9,397.00 - $10,597.00
Current price $9,397.00

Inverter Generator | Mi-T-M

Mi-T-M
Original price $1,582.00 - Original price $4,961.00
Original price
$1,582.00 - $4,961.00
$1,582.00 - $4,961.00
Current price $1,582.00

Inverter generator line spanning 2000 to 7300 watts, producing clean, stable AC power with carbon monoxide detection and automatic shutdown built i...

View full details
Original price $1,582.00 - Original price $4,961.00
Original price
$1,582.00 - $4,961.00
$1,582.00 - $4,961.00
Current price $1,582.00

GDP5HANC2 High-Cycle Portable Generator | Multiquip

Multiquip
Original price $6,752.00 - Original price $6,752.00
Original price
$6,752.00
$6,752.00 - $6,752.00
Current price $6,752.00

The Multiquip GDP5HANC2 is a portable generator that produces 180 Hz and 60 Hz power at the same time, so one machine runs high-cycle concrete vibr...

View full details
Original price $6,752.00 - Original price $6,752.00
Original price
$6,752.00
$6,752.00 - $6,752.00
Current price $6,752.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare