Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support

E40 Mini Skid Steer Backhoe | Eterra

Brand Eterra AttachmentsSKU ET-03A040-A001-61
Original price $1,600.00 - Original price $1,600.00
Original price
$1,600.00
$1,600.00 - $1,600.00
Current price $1,600.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Eterra E40 Mini Skid Steer Backhoe is a fixed 4 foot boom backhoe attachment for mini skid steers. It digs to 48 inches with a 52 inch overall reach, lifts 1,000 lb and develops 14,000 lb of breakout force, running on 10 GPM at 900 PSI. It carries a fixed thumb and Eterra's ECS quick change coupler for 8 to 16 inch buckets.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Type: Mini skid steer backhoe attachment
  • Boom: Fixed 4 ft
  • Overall Reach: 52 in
  • Digging Depth: 48 in
  • Lift Capacity: 1,000 lb
  • Breakout Force: 14,000 lb
  • Bucket Range: 8 to 16 in
  • Cylinder Stroke: 8.625 in
  • Coupler System: Eterra ECS quick change, two bolt wedge clamp
  • Weight: 222 lb

Fitment / Machine Requirements

  • Carrier: Mini skid steer
  • Minimum Hydraulic Flow: 10 GPM
  • Minimum Pressure: 900 PSI
  • High Flow Required: No
  • Coupler Face: Flat face
  • Maximum Flow: confirm with supplier


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Eterra E40 is the mini skid steer member of Eterra's E Series backhoes. Where the E60 and E70 are built for full size skid steers, this one is sized for a mini carrier and carries a fixed boom rather than an extendable one.

Reach and depth are what decide whether a backhoe suits a mini machine at all. This one is proportioned so the carrier can work its full range without lifting a track, which is the difference between a backhoe a mini can use and one it can only carry.

The ECS quick change coupler is the part that separates it from a fixed bucket backhoe. Buckets and tools swap on a two bolt wedge clamp rather than on pins, so one attachment covers a utility trench and a footing without a trip back to the yard.

A fixed thumb sits opposite the bucket and gives a grab point. That is what makes the machine useful for pulling roots, setting pipe and clearing debris rather than only moving soil.

Construction is A572 Grade 50 steel on a reinforced boom. The hoses ship with flat face couplers that connect directly to the carrier, so no adaptor is needed on a machine already running flat face.

The supplier publishes a minimum hydraulic requirement and states no maximum flow anywhere on its own surfaces. That absence is recorded as an open supplier question rather than filled in, so a buyer near the top of a mini carrier's flow range should confirm before ordering.

Common Applications

  • Footing and foundation digging where a full size backhoe cannot reach the site
  • Utility and irrigation trenching on a mini carrier
  • Root pulling and debris clearing using the fixed thumb
  • Pipe setting and placement work at reach

Selection Notes

  • The cart requires a mini skid steer mount selection, so confirm your carrier's mount before ordering.
  • The cart also requires a standard digging bucket selection, offered at 8, 12 and 16 in.
  • The supplier publishes a minimum flow and pressure and no maximum flow.
  • The E60 and E70 are full size skid steer backhoes and are separate listings.
  • The operator manual is not attached to this listing. It exceeds the store's document size cap and both sanctioned reduction routes were measured and refused.
Capacity
Overall reach
52 in (1321 mm)
Digging depth
48 in (1219 mm)
Lift capacity
1,000 lb (454 kg)
Breakout force
14,000 lb
Cylinder stroke
8.625 in (219 mm)
Build
Boom
Fixed 4 ft
Boom shaft size
4 in x 4 in
Length
55 in (1397 mm)
Height
29 in (737 mm)
Width
24.75 in (629 mm)
Housing material
A572 Grade 50 steel on a reinforced boom
Thumb
Fixed, 17 in long and 6 in wide
Coupler system
Eterra ECS quick change, two bolt wedge clamp
Bucket range
8 to 16 in
Hydraulics
Minimum hydraulic specification
10 GPM at 900 PSI
Maximum flow
Confirm with supplier
Coupler face
Flat face, supplied with the attachment
Machine Notes
Carrier
Mini skid steer
Mount
Selected in the cart from the mini skid steer mount options
Series weight range, all E Series models
225 to 270 lb depending on the model, the supplier's own family statement rather than this model's figure
Dimensions & Weights
Weight
222 lb (101 kg)
ECS quick change coupler on a two bolt wedge clamp
Swaps buckets from 8 to 16 in without pinning, so one attachment covers a utility trench and a footing
Fixed thumb opposite the bucket
Gives a grab point for roots, pipe and debris rather than only moving soil

Included with Purchase

  • 1 Eterra E40 Mini Skid Steer Backhoe (variant/model as ordered)

Not Included Unless Stated

  • Mini skid steer carrier machine
  • Additional buckets or ECS tools beyond the bucket selected at order
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

Backhoe Attachment | Glacier

Glacier Attachments
Original price $3,553.00 - Original price $3,553.00
Original price
$3,553.00
$3,553.00 - $3,553.00
Current price $3,553.00

Glacier fixed-boom backhoe attachment for skid steers and compact track loaders, digging to 8.5 ft on a 45 in overall width. Built on a 1/2 in quic...

View full details
Original price $3,553.00 - Original price $3,553.00
Original price
$3,553.00
$3,553.00 - $3,553.00
Current price $3,553.00

Mini Skid Steer Buckets | Arrow

Arrow Material Handling Products
Original price $1,094.44 - Original price $1,675.00
Original price
$1,094.44 - $1,675.00
$1,094.44 - $1,675.00
Current price $1,094.44

Arrow Mini Skid Steer Buckets for walk-behind and mini track loaders, in four widths on a mini universal or Bobcat mount. Quarter inch shell and en...

View full details
Original price $1,094.44 - Original price $1,675.00
Original price
$1,094.44 - $1,675.00
$1,094.44 - $1,675.00
Current price $1,094.44

Hex Auger Extension | Eterra

Eterra Attachments
Original price $290.00 - Original price $380.00
Original price
$290.00 - $380.00
$290.00 - $380.00
Current price $290.00

Eterra Hex Auger Extensions add depth to an auger setup. They are fixed-length extensions on a 2 inch hex in and out, built with wave pattern welds...

View full details
Original price $290.00 - Original price $380.00
Original price
$290.00 - $380.00
$290.00 - $380.00
Current price $290.00

Earth Auger Bits | Eterra

Eterra Attachments
Original price $475.00 - Original price $1,470.00
Original price
$475.00 - $1,470.00
$475.00 - $1,470.00
Current price $475.00

Eterra Earth Auger Bits are 2 inch hex drive auger bits for skid steer and mini skid steer auger drives. They run 48 inches long in diameters from ...

View full details
Original price $475.00 - Original price $1,470.00
Original price
$475.00 - $1,470.00
$475.00 - $1,470.00
Current price $475.00

Mini Bucket (Dingo / Mini MT) | Storm

Storm Attachments
Original price $738.00 - Original price $1,107.00
Original price
$738.00 - $1,107.00
$738.00 - $1,107.00
Current price $738.00

Storm mini bucket for mini skid steers and compact tool carriers with the Mini CII (Dingo) or Mini MT quick attach. HD 3/8" x 4" welded cutting edg...

View full details
Original price $738.00 - Original price $1,107.00
Original price
$738.00 - $1,107.00
$738.00 - $1,107.00
Current price $738.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare