The MX330 is the step from swinging knives to a fixed head, for crews whose material has moved past grass and into woody growth that a flail folds around rather than cuts. High speed teeth with a concave carbide tip chip the stem bit by bit, and they rotate in the holder so a fresh edge comes into the cut without the tooth coming off the machine.

It sits on the same light carrier class as the flail model but doubles the tooth count and steps the rotor shaft up, which is what lets it hold a cut in standing brush instead of beating it down. For a contractor running one mini excavator across mixed sites, this is the head that covers the widest range of material before the carrier itself becomes the limit.

The mount is the second decision to make, because an excavator does not have one standard attachment face the way a skid steer or a tractor does. A skid steer takes a universal quick-attach plate and a tractor takes a numbered hitch class, so the same head bolts to any machine in the class. An excavator instead carries its own coupler geometry, and Baumalight's ordering route for it is split by that geometry. Blank Weld-On Plate Only ships the supplier's own D001161 blank plate, which the supplier describes as a plate designed for you to weld on your own ear lugs for your specific excavator and rates for a 1.5 to 10 ton carrier; the bolt pattern on the plate is specific to Baumalight, so the head-side interface is fixed and the machine-side geometry is taken up by lugs a fabricator welds to suit the carrier. The three coupler options arrive fitted to the carrier instead: in the supplier's words, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives, with a wedge, a pin-on or pin-grabber, or a cross-pin style coupler resolved from the excavator brand and model at order time, and Excavator Weight Class sizes that mount to the carrier. Choose the coupler style and the weight class, and give the excavator brand and model when ordering.

Common Applications

• Clearing heavy vegetation and light brush from mini excavators
• Fence line and ditch bank maintenance
• Trail and right-of-way clearing
• Reclaiming overgrown ground on compact carriers

Excavator Mounting

• An excavator has no single standard attachment face, so the mount is matched to the carrier's own coupler rather than shared across a class.
• The D001161 blank weld-on plate ships blank, carries the Baumalight bolt pattern on the head side, and is welded to ear lugs cut to suit the machine.
• Wedge, pin-on or pin-grabber, and cross-pin style couplers are fitted to the buyer's excavator through Baumalight's turn-key process, chosen here in Mount Option and sized by Excavator Weight Class.

Selection Notes

• Match the mulcher to the carrier by class first: tracked excavators from 3 to 8 ton and wheeled excavators from 5 to 10 ton carry this model.
• Teeth are rotatable in the holder, so a dulled edge is turned rather than replaced on the first pass.
• Hydraulic couplers are ordered separately because the face varies by carrier. Confirm the face against your carrier before ordering.
• Mount Option changes what arrives, and with Excavator Weight Class it is the second real decision to make. Blank Weld-On Plate Only ships the supplier's own blank plate, D001161, which the supplier rates for a 1.5 to 10 ton excavator and which the buyer welds on. The three coupler options arrive fitted to the carrier instead.
• Excavator Weight Class sizes the mount to the carrier. The supplier prices and weighs its couplers by that same ton banding, at about 100 lb for a 1.5 to 6 ton carrier and 200 lb for a 7 to 9 ton carrier.
• A coupler is fitted to your specific machine, not to this model. Give the excavator brand and model when ordering.
• The plate's mounting bolt set, D004951, is a separate supplier part number. The supplier lists it as free when the mount is ordered with the whole good. Confirm at time of order.