Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support

MP348 Brush Mulcher | Baumalight

Brand BaumalightSKU MP348-540
Original price $9,990.00 - Original price $10,648.00
Original price
$9,990.00
$9,990.00 - $10,648.00
Current price $9,990.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Baumalight MP348 is a 300 Series fixed-tooth mulcher for three-point hitch tractors, with a 60 in path and a 48 in rotor carrying 60 rotatable high speed teeth. It weighs 1,050 lb, runs from a 540 rpm power take-off on a quick-hitch-compatible CAT 1 hitch, and needs no tractor remote.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 1,050 lb
  • Path Width: 60 in
  • Rotor Width: 48 in
  • Rotor Diameter: 15 in at the tool tips
  • Rotor Weight: 230 lb with tools
  • Number of Cutters: 60
  • Tooth Part Number: H3000
  • Cutting Style: High speed teeth

Fitment / Machine Requirements

  • Hitch Size: CAT 1
  • Quick Hitch Compatible: Yes
  • Engine Horsepower: 25 to 50
  • Maximum PTO Horsepower: 40
  • Drive Speed: 540 rpm
  • Gearbox Spline Size: 1-3/8 in
  • Tractor End Spline Size: 1-3/8 in
  • Cutting Depth: Level
  • System Protection: Slip clutch


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The MP348 is the step up from the smallest head in the line without stepping up the tractor. It takes a wider path on a CAT 1 hitch off the tractor power take-off, and it stays inside what a mid-compact tractor can carry and still steer.

Drive is mechanical the whole way. Nothing is plumbed. A reinforced belt carries the load from the gearbox to the rotor, and a slip clutch in the driveline releases at a set torque so the gearbox is not what gives way when the rotor stalls.

The teeth are the H3000 high speed type with a concave carbide tip that chips material away rather than tearing it. Each tooth turns in its holder, so a dulled edge is brought round to a fresh one instead of the tooth being pulled and replaced, and the spiral pattern on the drum brings them into the cut one at a time for a smoother pass. A wire protection kit is fitted around the rotor and shaft, which is the part that matters in an old fence line where a caught wire otherwise walks to the end of the rotor and wraps the shaft.

Common Applications

  • Fence line clearing and maintenance behind a compact tractor
  • Trail and right-of-way brushing
  • Light brush and heavy vegetation reclamation
  • Property maintenance where no spare tractor circuit is available

Selection Notes

  • Size the tractor by power first: 25 to 50 engine horsepower, with a maximum of 40 at the power take-off.
  • The hitch is CAT 1 and is quick hitch compatible, which the 500 and 900 Series tractor heads are not.
  • This model runs entirely off the power take-off, so a tractor with no spare circuit still carries it.
  • Cutting is at grade. The 500 Series heads are the first in the line that cut below grade.
  • The wire protection kit and the slip clutch are both standard fitment, not options.
  • Read the brush chart below against the tractor's horsepower and transmission. It gives a maximum brush diameter for each pairing, and the geared and hydrostatic tables differ because the technique differs, not the head.
  • Six replacement teeth matching the fitted tooth option come with every Baumalight brush mulcher, and a D004978 24-pack of H3000 teeth can be added at purchase.
Mount & Interface
Hitch size
CAT 1
Quick hitch compatibility
Yes
Gearbox spline size
1-3/8 in (35 mm)
Tractor end spline size
1-3/8 in (35 mm)
Cutting Capacity
Path width
60 in (1,524 mm)
Rotor width
48 in (1,219 mm)
Cutting depth
Level
Rotor & Teeth
Rotor diameter at tool tips
15 in (381 mm)
Rotor shaft size
2 in (51 mm)
Rotor weight with tools
230 lb (104 kg)
Number of cutters
60
Cutting style
High speed teeth
Tooth part number
H3000
System protection
Slip clutch
Machine Notes
Minimum engine horsepower
25
Maximum engine horsepower
50
Maximum PTO horsepower
40
Drive speed
540 rpm
Hydraulic flow and pressure
Not applicable
Brush Capacity, Low Gear
Tractor transmission
Geared, low gear
Brush Capacity, Hydrostatic
Tractor transmission
Hydrostatic
Dimensions & Weights
Unit weight
1,050 lb (476 kg)
Freight weight
1,150 lb (522 kg)
Shipping size
62 x 40 x 43 in (1,575 x 1,016 x 1,092 mm)
Dimensional weight
643 lb (292 kg)
Brush Capacity, Low Gear: Maximum brush cutting sizes, brush diameter in inches
Technique25 HP30 HP40 HP55 HP
Rotor speed1,800 rpm1,800 rpm1,800 rpm1,800 rpm
Slow reverse0.5 in1 in1.5 in2 in
Stop and chew1 in1.5 in2 in2.5 in
Brush Capacity, Hydrostatic: Maximum brush cutting sizes, brush diameter in inches
Technique25 HP30 HP40 HP55 HP
Rotor speed1,800 rpm1,800 rpm1,800 rpm1,800 rpm
Slow reverse1.5 in2 in2.5 in3 in
Stop and chew2 in3 in4 in5 in
60 in path on a CAT 1 hitch
Covers half again the width of the smallest head without moving up a tractor class
Quick hitch compatible
Goes on and comes off without crawling under the three point hitch
60 rotatable high speed teeth
A dulled edge is turned in the holder rather than the tooth being pulled and replaced
Slip clutch protection
The driveline gives before the gearbox does when the rotor stalls

Included with Purchase

  • 1 MP348 Brush Mulcher with a 540 rpm gearbox
  • H3000 high speed teeth fitted
  • 6 replacement teeth matching the fitted tooth option, with every purchase
  • Slip clutch driveline protection
  • Wire protection kit
  • D004978 24-pack of H3000 teeth, where the buy box choice reads 6 Included + 24 Pack

Not Included Unless Stated

  • Power take-off driveshaft
  • Tractor
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

FMP780 Flail Mower | Baumalight

Baumalight
Original price $9,287.00 - Original price $9,287.00
Original price
$9,287.00
$9,287.00 - $9,287.00
Current price $9,287.00

The Baumalight FMP780 is a three-point-hitch flail mower for tractors, cutting an 87 in path over an 80 in rotor with 42 heavy F7000 flail teeth in...

View full details
Original price $9,287.00 - Original price $9,287.00
Original price
$9,287.00
$9,287.00 - $9,287.00
Current price $9,287.00

FMP260 Flail Mower | Baumalight

Baumalight
Original price $5,654.00 - Original price $5,794.00
Original price
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
Current price $5,654.00

The Baumalight FMP260 is a three-point-hitch flail mower for compact tractors, cutting a 72 in path over a 60 in rotor with 30 free-swinging flail ...

View full details
Original price $5,654.00 - Original price $5,794.00
Original price
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
Current price $5,654.00

KR65 65 kW PTO Generator | Baumalight

Baumalight
Original price $13,997.00 - Original price $15,497.00
Original price
$13,997.00 - $15,497.00
$13,997.00 - $15,497.00
Current price $13,997.00

The Baumalight KR65 is a 65 kW tractor-driven PTO generator for a tractor of 97 horsepower at full load, the largest of the four KR models. It ship...

View full details
Original price $13,997.00 - Original price $15,497.00
Original price
$13,997.00 - $15,497.00
$13,997.00 - $15,497.00
Current price $13,997.00

KR52 52 kW PTO Generator | Baumalight

Baumalight
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

The Baumalight KR52 is a 52 kW tractor-driven PTO generator for a tractor of 76 horsepower at full load, the third of the four KR models. It ships ...

View full details
Original price $12,197.00 - Original price $13,697.00
Original price
$12,197.00 - $13,697.00
$12,197.00 - $13,697.00
Current price $12,197.00

KR44 44 kW PTO Generator | Baumalight

Baumalight
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

The Baumalight KR44 is a 44 kW tractor-driven PTO generator for a tractor of 65 horsepower at full load, the second of the four KR models. It ships...

View full details
Original price $11,297.00 - Original price $12,697.00
Original price
$11,297.00 - $12,697.00
$11,297.00 - $12,697.00
Current price $11,297.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare