All Products

Storm stump bucket for stump and root removal, in A572 steel with a serrated top edge, welded-on teeth, and a 5/8" x 6" cutting edge on a 42" deep ...

A heavy hydraulic grapple for tearing out stumps, roots, and rock and moving them clear. Comes kited with a 2.5 in cylinder and hoses, with optiona...

The Supreme grade of the small-diameter concrete blade line is a high diamond concentration blade for concrete and masonry, in twenty configuration...

The Eterra Surge Grapple is a dual-arm skid steer grapple rake for clearing brush, rock, and debris on land-clearing jobs. It is built from 3/4-inc...

The TC-7 Stand-Up Edger is a walk-behind concrete edge grinder that gives the operator the control of a handheld grinder from an upright working po...

The TC-7-VS is the TC-7 Stand-Up Edger delivered as a polishing package: the same 15-amp Metabo-driven upright edge grinder equipped with a dust sh...

The Eterra Telescopic Auger Extension is an adjustable 72 inch auger extension for 2 inch hex output shafts. A pin slides the auger hub to a new ho...

The Lieutenant is a diamond blade for cutting concrete and asphalt, in three diameters from 12 to 16 in. All three sizes carry a 1 in arbor with a ...

The Blue Series is the .187 in Tiger Tooth built for joint restoration, published in 8 and 10 in. Large grit mills out old polyurea and epoxy while...

The Tiger Tooth II is a vacuum brazed diamond blade built on a one-piece core with no welds, published in 12 and 14 in. Both sizes carry a 20 mm so...

The Baumalight TN236 is a 200 series trencher for 1,500 to 4,000 lb mini skid steers and mini track loaders, digging 36 in deep and 4 or 6 in wide ...

The Baumalight TN548 is a 500 series trencher on a universal skid steer plate for 3,000 to 7,000 lb skid steers, digging 48 in deep and 6, 8 or 10 ...

The Baumalight TN560 is a 500 series trencher on a universal skid steer plate for 3,000 to 7,000 lb skid steers, digging 60 in deep and 6, 8 or 10 ...

The Baumalight TN760 is the 700 series trencher for high flow skid steers of 4,000 to 12,000 lb, digging 60 in deep and 6, 8 or 10 in wide by chain...

The Baumalight TNM336B is the 36 in mini trencher on a Bobcat mini skid steer plate, for 1,500 to 4,000 lb Bobcat mini skid steers, digging 36 in d...

The Baumalight TNS336 is a 300 series trencher on a universal skid steer plate for 2,000 to 5,000 lb skid steers, digging 36 in deep and 4 or 6 in ...

The Baumalight TNS536 is a 500 series trencher on the universal skidsteer mount for 3,000 to 7,000 lb skid steers, digging 36 in deep and 6, 8 or 1...

A toothed digging bucket for hard, compacted, and rocky ground that a smooth-edge bucket cannot penetrate.

Storm light-duty loader bucket for compact tractors, skid steers, and landscape or property work. HD 1/2" x 4" welded cutting edge, 1/8" body, 3/8"...

The Mi-T-M Trash Pump removes water and solid-laden waste from job sites and handles solids up to 1 inch in diameter. Engine-driven 3-inch and 4-in...

Glacier tree puller for skid steers, compact track loaders, and mini skid steers, removing trees, shrubs, and brush up to 12 in in diameter. Three ...

A single-blade tree spade for skid steers and compact track loaders that digs and lifts small trees and shrubs with the root ball intact. Shovel-li...

Glacier truss boom for skid steers and compact track loaders, extending to 20 ft across three sections with a pintle-style locking hook. Rated 900 ...

The Baumalight TX12 is a 12 kW tractor-driven PTO generator for a tractor of 21 horsepower at full load, the second of the five TX models. It is a ...