Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support

Angle Snow Blade | Storm

Brand Storm AttachmentsSKU 02SBLADE4-SS
Original price $2,699.00 - Original price $3,907.00
Original price
$2,699.00
$2,699.00 - $3,907.00
Current price $2,699.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

Storm angle snow blade, 4 ft to 8 ft widths, with a 7 ga 27" moldboard, AR400 cutting edge, and four HD trip springs. Angles 30 degrees left or right in hydraulic power-angle or manual configurations. SSQA or John Deere mount.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Widths: 4 ft to 8 ft
  • Moldboard: 7 ga, 27" tall
  • Cutting Edge: AR400 steel; 1.5" x 8" HD rubber edge optional
  • Trip Springs: 4 HD trip springs
  • Maximum Angle: 30 degrees left or right
  • Frame: 3 x 3 x 7 ga square tube
  • Angle Drive: power (hydraulic) or manual
  • Finish: industrial enamel finish
  • Weight: 405 lb to 570 lb by width, mount, and angle type

Fitment / Machine Requirements

  • Mount: SSQA or John Deere as ordered
  • Carriers: skid steers and compact track loaders
  • Power-Angle Hydraulics (flow, pressure, coupler face): confirm with supplier
  • Minimum Carrier Rated Operating Capacity: confirm with supplier


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Storm Angle Snow Blade is an angle plow that casts snow to one side as the carrier drives forward, clearing drives, lots, and paths on skid steers and compact track loaders. Angling the moldboard windrows the snow off to one side instead of pushing it straight ahead, so the operator can open a lane in a single pass and roll the windrow to the edge. It comes in a hydraulic power-angle version and a manual-angle version, so a buyer can match it to how often they reset the angle.

Trip springs let the moldboard fold back over a hidden curb or manhole and snap upright, so a struck obstacle trips the blade instead of stopping the machine. An AR400 edge takes the scraping against pavement, and the blade angles either from the carrier's auxiliary hydraulics on the power version or by hand on the manual version. A square-tube frame and a tall moldboard built for repeated plowing are what the operator clearing lanes through the winter is after.

Common Applications

  • Plowing and clearing snow on drives, lots, and paths
  • Windrowing snow to one side in a single pass
  • Clearing lanes and paths

Selection Notes

  • Angle plow; angles 30 degrees left or right to windrow snow
  • AR400 steel cutting edge with four HD trip springs; 1.5" x 8" rubber edge optional
  • Power (hydraulic) angle or manual angle; the power version runs off the carrier's auxiliary hydraulics
  • Available in 4 ft to 8 ft widths; SSQA or John Deere mount
  • On the power-angle version, confirm hydraulic flow and pressure with supplier
Build
Moldboard
7 ga
Cutting edge
AR400 steel; 1.5 in x 8 in HD rubber edge optional
Trip springs
4 HD trip springs
Maximum angle
30 degree
Tube
3 x 3 x 7 ga square tube
Angle drive
Power (hydraulic) or manual
Mount
SSQA or John Deere
Finish
Industrial enamel finish
Warranty
2 year on defects
Accessories: To order any of these accessories, contact support@hardscapeheavy.com
Side kit
Converts the angle blade to a box pusher; both sides plus all hardware, all 1/4 in material, 24 in tall x 24 in deep, kit weighs 72 lb
Part OSBLADE-RBR-5
5 ft HD rubber edge option, 1.5 in x 8 in
Part OSBLADE-RBR-6
6 ft HD rubber edge option, 1.5 in x 8 in
Part OSBLADE-RBR-7
7 ft HD rubber edge option, 1.5 in x 8 in
Part OSBLADE-RBR-8
8 ft HD rubber edge option, 1.5 in x 8 in
Hydraulics
Cylinders
Dual HD hydraulic cylinders (power-angle configuration)
Coupler face
Confirm with supplier
Hydraulic flow (GPM)
Confirm with supplier
Operating pressure (PSI)
Confirm with supplier
Dimensions & Weights
Moldboard height
27 in (686 mm)
WidthWeight (skid-steer, power angle)
4 ft (1219 mm)410 lb (186 kg)
5 ft (1524 mm)450 lb (204 kg)
6 ft (1829 mm)490 lb (222 kg)
7 ft (2134 mm)530 lb (240 kg)
8 ft (2438 mm)570 lb (259 kg)
Trip springs
Let the moldboard fold back over a hidden obstacle and snap upright

Included with Purchase

  • 1 Storm Angle Snow Blade (variant/model as ordered)
  • AR400 steel cutting edge

Not Included Unless Stated

  • Rubber cutting-edge option
  • Side kit (box-pusher conversion)
  • Coupler set on the power-angle version (flat-faced 08 SAE or AG, ordered separately)
  • Skid steer or compact track loader
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

Mini Skid Steer V-Blade | HitchDoc

HitchDoc
Original price $2,550.00 - Original price $2,955.00
Original price
$2,550.00 - $2,955.00
$2,550.00 - $2,955.00
Current price $2,550.00

HitchDoc mini skid steer V-blade, 4 ft and 5 ft widths, 22 in tall, with manually adjustable wings for scoop, V-cut, straight or angled work. Unive...

View full details
Original price $2,550.00 - Original price $2,955.00
Original price
$2,550.00 - $2,955.00
$2,550.00 - $2,955.00
Current price $2,550.00

Light Material Bucket | Maxx

Maxx Attachments
Original price $2,390.00 - Original price $4,150.00
Original price
$2,390.00 - $4,150.00
$2,390.00 - $4,150.00
Current price $2,390.00

The Maxx Attachments Light Material Bucket is a heavy-duty, high-capacity bucket for moving large volumes of low-density material like snow, mulch,...

View full details
Original price $2,390.00 - Original price $4,150.00
Original price
$2,390.00 - $4,150.00
$2,390.00 - $4,150.00
Current price $2,390.00

HD Snow Pusher (Box) | Glacier

Glacier Attachments
Original price $4,262.00 - Original price $4,689.00
Original price
$4,262.00 - $4,689.00
$4,262.00 - $4,689.00
Current price $4,262.00

Glacier HD box snow pusher, 8 ft and 10 ft widths, with a 3/16" moldboard, 3/8" sides, and an adjustable 1.5" x 8" rubber cutting edge. Replaceable...

View full details
Original price $4,262.00 - Original price $4,689.00
Original price
$4,262.00 - $4,689.00
$4,262.00 - $4,689.00
Current price $4,262.00

6-Way Dozer Blade | HitchDoc

HitchDoc
Original price $5,320.00 - Original price $8,150.00
Original price
$5,320.00 - $8,150.00
$5,320.00 - $8,150.00
Current price $5,320.00

HitchDoc 6-Way Dozer Blade, 6 ft to 8 ft widths, 22 in tall, with 10 degrees of tilt and 30 degrees of cut angle either way on four double-acting c...

View full details
Original price $5,320.00 - Original price $8,150.00
Original price
$5,320.00 - $8,150.00
$5,320.00 - $8,150.00
Current price $5,320.00

2000 LB Pallet Forks | Storm

Storm Attachments
Original price $689.00 - Original price $689.00
Original price
$689.00
$689.00 - $689.00
Current price $689.00

Storm 2000 LB pallet forks for small skid loaders and compact tractors, with lighter overall weight, 3" x 1" fork blades, 42" length, a 36" walk-th...

View full details
Original price $689.00 - Original price $689.00
Original price
$689.00
$689.00 - $689.00
Current price $689.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare