(805) 398-6165
Mon to Sun, 9am to 5pm PST
(805) 398-6165
Mon to Sun, 9am to 5pm PST
The JS-131 is a gas walk-behind joint clean-out saw for milling control joints, concrete sawing, and trench cutting. It runs dry diamond blades to ...
View full detailsThe Hydraulic Belly Saw straps to pipes from 8 to 24 in diameter and pulls around the circumference for a straight, controlled cut on 5 to 7 GPM hy...
View full detailsThe HS Hand-Held Air Saw is a direct-drive cut-off saw that runs on 90 CFM at 90 PSI shop air instead of a gas engine, in two sizes: the HS-125 wit...
View full detailsThe FSB-150H is a hydraulic walk-behind saw that cuts to 7.5 in deep with blades up to 20 in, flush-cut capable, running on 12 GPM at 2,500 PSI. It...
View full detailsThe FSB-150 is an air-driven walk-behind saw that cuts to 7.5 in deep with blades up to 20 in, running a gearbox drive on 90 CFM at 90 PSI shop air...
View full detailsThe CC-100 is a gas walk-behind crack chasing saw that routes out random cracks in concrete and asphalt for filling with repair products or sealant...
View full detailsThe Air Powered Belly Saw straps to pipes from 8 to 24 in diameter and guides around the circumference for a straight, controlled cut, including th...
View full detailsCombi 350 iPower tile, stone, and masonry saw, 14 in blade, 4 HP 220V high-torque motor, cuts up to 41.5 in (47.25 in with a plunge cut). Stainless...
View full detailsCombi 250/1500 VA overhead rail tile saw, 10 in blade, cuts up to 57 in (60 in with a plunge cut) for the largest-format tile. 1.75 HP 120V motor, ...
View full detailsCombi 250/1000 VA overhead rail tile saw, 10 in blade, cuts up to 37 in (40 in with a plunge cut) for large-format tile. 1.75 HP 120V motor, laser ...
View full detailsCombi 250 VA overhead rail tile saw, 10 in general purpose blade, cuts up to 28 in (31 in with a plunge cut). 1.75 HP 120V motor, complete with hig...
View full detailsCombi 200 VA overhead rail tile saw, 8 in continuous rim porcelain blade, cuts up to 21 in (24 in with a plunge cut). 1.75 HP 120V motor, complete ...
View full detailsMasonry 750 block, stone, and precast saw, 30 in blade, 18 in cutting depth (27 in with plunge). Available in 5.5 HP single-phase or 7.5 HP 3-phase...
View full detailsMasonry 350 brick and block saw, 14 in blade, 2 HP 120V high-torque motor, cuts up to 30 in long and 4.75 in deep. Folding stand with wheel kit for...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
