Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support
Studio three-quarter against white of a CAT skid steer carrying the light grey FEB700, Baumalight lettering across the hood and flail knives along the rotor
Studio three-quarter against white of a CAT 272D skid steer with the FEB700, the flail knives and the integrated skid shoes in view
Studio side view against white of a CAT 272D XHP wheeled skid steer with the FEB700 lowered on its floating plate
Close studio view of the FEB700 on a skid steer arm, the sleeved hydraulic hoses running to the motor housing
The FEB700 on a white Bobcat track loader in tall pasture grass, Baumalight lettering across the hood and the roller bar behind the rotor
The FEB700 on a white Bobcat track loader in cut grass, black sleeved hoses running to the motor beside the yellow decal panel
White and red Bobcat T66 track loader mowing pasture with the FEB700, the low profile head riding just above the sward
Bobcat T66 track loader in mown grass with the FEB700 lowered and a cut swath behind it
Close view of the FEB700 motor end and its sleeved hoses on a white Bobcat, tall grass standing in front of the rotor
Overhead view of a white Bobcat track loader mowing a strip of long grass with the FEB700
Overhead view of a CAT skid steer cutting into heavy green growth with the FEB700
Overhead view of a CAT skid steer cutting a lane through dense green cover with the FEB700
CAT skid steer in woodland with the light grey FEB700 lowered into green brush
CAT skid steer on a woodland edge with the FEB700 cutting into standing green brush
The FEB700 head raised in heavy green brush beside a CAT skid steer, the free swinging knives visible under the hood
CAT skid steer on a woodland track with the FEB700 lowered into roadside brush
Studio three-quarter against white of a CAT skid steer carrying the light grey FEB700, Baumalight lettering across the hood and flail knives along the rotor
Studio three-quarter against white of a CAT 272D skid steer with the FEB700, the flail knives and the integrated skid shoes in view
Studio side view against white of a CAT 272D XHP wheeled skid steer with the FEB700 lowered on its floating plate
Close studio view of the FEB700 on a skid steer arm, the sleeved hydraulic hoses running to the motor housing
The FEB700 on a white Bobcat track loader in tall pasture grass, Baumalight lettering across the hood and the roller bar behind the rotor
The FEB700 on a white Bobcat track loader in cut grass, black sleeved hoses running to the motor beside the yellow decal panel
White and red Bobcat T66 track loader mowing pasture with the FEB700, the low profile head riding just above the sward
Bobcat T66 track loader in mown grass with the FEB700 lowered and a cut swath behind it
Close view of the FEB700 motor end and its sleeved hoses on a white Bobcat, tall grass standing in front of the rotor
Overhead view of a white Bobcat track loader mowing a strip of long grass with the FEB700
Overhead view of a CAT skid steer cutting into heavy green growth with the FEB700
Overhead view of a CAT skid steer cutting a lane through dense green cover with the FEB700
CAT skid steer in woodland with the light grey FEB700 lowered into green brush
CAT skid steer on a woodland edge with the FEB700 cutting into standing green brush
The FEB700 head raised in heavy green brush beside a CAT skid steer, the free swinging knives visible under the hood
CAT skid steer on a woodland track with the FEB700 lowered into roadside brush

FEB700 Flail Mower | Baumalight

Brand BaumalightSKU FEB700-C540
$10,897.00 - $11,297.00
$10,897.00
$10,897.00 - $11,297.00
$10,897.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Baumalight FEB700 is a hydraulic flail mower for universal-mount skid steers, cutting an 88 in path over an 80 in rotor with 42 free-swinging blade clusters in a spiral pattern. It runs on 18 to 35 GPM at up to 4,000 PSI, needs a case drain, and rides on a floating plate with independent linkage so the head follows uneven ground.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Path width: 88 in
  • Rotor width: 80 in
  • Unit weight: 1,091 lb
  • Cutting depth: Level
  • Roller bar: Fixed
  • Blade clusters: 42, in a spiral pattern
  • Knife type: Heavy duty free swinging flail knives
  • Rotor shaft diameter: 1.75 in
  • Rotor diameter at tool tips: 17.5 in
  • Rotor drive: Belt, adjustable tensioner

Fitment / Machine Requirements

  • Mount: Standard universal skidsteer plate, floating
  • Linkage: Independent, allowing the head to follow uneven ground
  • Motor: C540 60 cc bent axis piston
  • Flow range: 18 to 35 GPM
  • Maximum pressure: 4,000 PSI
  • Case drain: Required; line and vent to atmosphere supplied
  • Hoses supplied: Yes
  • Couplers supplied: No


Need full technical detail? See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The FEB700 mows and mulches grass, weeds, light brush and small trees from a skid steer or compact track loader, taking an 88 in path over an 80 in rotor. It is a machine for municipal and commercial grounds crews, right-of-way and verge contractors, and sitework crews working ground that hides rock and debris, where free-swinging knives give way on impact instead of taking it on a rigid edge.

The build is organised around keeping material moving and the operator seeing it. A large back discharge feeds material evenly through the machine rather than packing it against the rotor, and the low profile body holds forward visibility as material enters, so nothing disappears into a blind spot at the moment it matters. The floating skidsteer plate and independent linkage let the head glide over uneven surfaces instead of scalping the high spots and skipping the low ones, integrated skid shoes carry the wear where the machine meets the ground, and the fixed roller bar holds one height once it is set while keeping the knives up off the rock. Two things decide whether it will run on a given carrier and both are worth settling before the order goes in: it needs a case drain, which the supplier ships as a line with a vent to atmosphere relief valve, and it arrives with hoses but without couplers.

Common Applications

  • Pasture, verge and field-edge mowing from a skid steer
  • Cutting grass, weeds and light brush in one pass
  • Municipal and commercial grounds maintenance
  • Right of way and trail mowing where a mulcher is more head than the job needs

Selection Notes

  • The FEB700 needs a case drain. The supplier states it as a requirement for smooth operation, not a preference, and ships the machine with a case drain line and a vent to atmosphere relief valve.
  • Hoses are supplied and couplers are not, so the coupler face is matched to the carrier at order time.
  • The flow band for this model is 18 to 35 GPM with a 4,000 PSI maximum. Baumalight's flow and pressure database covers over a thousand carrier models, and is where to check a specific machine.
  • The unit weight is 1,091 lb. The supplier bills freight on a separate 1,347 lb figure for this part number.
  • Cut height is set by tilting the skid steer plate while the head pivots on the roller bar. The roller bar itself is fixed, so the height holds once it is set.
  • The rotor runs on a belt with an adjustable tensioner, tightened by loosening the bolts and raising the motor mount, with no separate idler wheel to wear out.
  • The knives swing back on impact rather than resisting it, which is the reason to choose a flail over a fixed-tooth mulcher in stony or littered ground.
Mount & Interface
Mount
Standard universal skidsteer plate, floating
Linkage
Independent, head follows uneven ground
Pins
Greaseable, zinc plated
Cutting Capacity
Path width
88 in (2,235 mm)
Rotor width
80 in (2,032 mm)
Cutting depth
Level
Roller bar
Fixed
Cut height adjustment
Tilt the plate; head pivots on the roller bar
Discharge
Back discharge, large opening
Build
Blade clusters
42, in a spiral pattern
Knife type
Heavy duty free swinging flail knives
Rotor shaft diameter
1.75 in (44 mm)
Rotor diameter at tool tips
17.5 in (444 mm)
Rotor weight with tools
253 lb (115 kg)
Rotor drive
Belt, adjustable tensioner
Skid shoes
Integrated
Body profile
Low, for forward visibility
Overload protection
Built-in relief system
Hose protection
Armoured and sleeved hoses
Finish
Powder coated
Hydraulics
Motor
C540 60 cc bent axis piston
Flow range
18 to 35 GPM
Maximum pressure
4,000 PSI
Case drain
Required; line and vent supplied
Hoses supplied
Yes
Couplers supplied
No
Dimensions & Weights
Unit weight
1,091 lb (495 kg)
Freight weight
1,347 lb (611 kg)
42 free-swinging blade clusters in a spiral pattern
Knives give way on impact instead of chipping, and the spiral spreads the load across the drum
Floating plate with independent linkage
The head follows the ground instead of scalping high spots and skipping low ones
Low body with a large back discharge
Material flows through instead of packing, and the operator keeps sight of it as it enters
Built-in relief system
An overload reaches the relief valve rather than the motor
Flow band
The carrier can be matched before the order rather than after the first job

Included with Purchase

  • 1 FEB700 Flail Mower with the C540 bent axis piston motor
  • F7000 free swinging flail knives fitted
  • 6 free replacement teeth, shipped in the enclosed compartment on top of the frame
  • Armoured and sleeved hydraulic hoses
  • Case drain line with a vent to atmosphere relief valve

Not Included Unless Stated

  • Hydraulic couplers, which the supplier states are not supplied with this machine
  • Carrier machine
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

Studio front view against white of the FMP780 showing the A-frame hitch, the gearbox and the full width of flail knives
Studio view against white of the grey FMP780 with its three-point hitch frame, PTO shaft and slip clutch

FMP780 Flail Mower | Baumalight

Baumalight
$9,287.00 - $9,287.00
$9,287.00
$9,287.00 - $9,287.00
$9,287.00

The Baumalight FMP780 is a three-point-hitch flail mower for tractors, cutting an 87 in path over an 80 in rotor with 42 heavy F7000 flail teeth in...

View full details
$9,287.00 - $9,287.00
$9,287.00
$9,287.00 - $9,287.00
$9,287.00
Studio view of the FMP260 from the rear showing the full width roller bar under the Baumalight hood
Studio three-quarter against white of the grey FMP260 with its three-point hitch frame, PTO shaft and flail knives

FMP260 Flail Mower | Baumalight

Baumalight
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
$5,654.00

The Baumalight FMP260 is a three-point-hitch flail mower for compact tractors, cutting a 72 in path over a 60 in rotor with 30 free-swinging flail ...

View full details
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
$5,654.00 - $5,794.00
$5,654.00
A yellow painted FMM148 on a Baumalight tracked mini skid steer on pavement, flail knives ranged along the rotor and the drum end plate at right
Baumalight yellow tracked mini skid steer on pavement carrying the grey FMM148, the full width of flail knives along the rotor

FMM148 Mini Skid Steer Flail Mower | Baumalight

Baumalight
$5,173.00 - $6,488.75
$5,173.00 - $6,488.75
$5,173.00 - $6,488.75
$5,173.00

The Baumalight FMM148 is a hydraulic flail mower for mini skid steers, cutting a 61 in path over a 48 in rotor with 30 free-swinging flail teeth of...

View full details
$5,173.00 - $6,488.75
$5,173.00 - $6,488.75
$5,173.00 - $6,488.75
$5,173.00

EX Series Excavator Flail Mower | Eterra

Eterra Attachments
$9,995.00 - $10,495.00
$9,995.00 - $10,495.00
$9,995.00 - $10,495.00
$9,995.00

The Eterra EX Series is an excavator flail mower that mulches grass, brush, and material up to 6 inches thick. Twenty Y-knife flail blades on an el...

View full details
$9,995.00 - $10,495.00
$9,995.00 - $10,495.00
$9,995.00 - $10,495.00
$9,995.00

EX-30M Micro Excavator Flail Mower | Eterra

Eterra Attachments
$8,895.00 - $8,895.00
$8,895.00
$8,895.00 - $8,895.00
$8,895.00

The Eterra EX-30M is a flail mower built for excavators in the 2,200 to 7,000 lb class. It mulches grass and brush up to 4 inches thick to a semi-m...

View full details
$8,895.00 - $8,895.00
$8,895.00
$8,895.00 - $8,895.00
$8,895.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare