Skip to content
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support

EX-30M Micro Excavator Flail Mower | Eterra

Brand Eterra AttachmentsSKU ETERRA-EX30M
Original price $8,895.00 USD - Original price $8,895.00 USD
Original price
$8,895.00 USD
$8,895.00 USD - $8,895.00 USD
Current price $8,895.00 USD
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

The Eterra EX-30M is a flail mower built for excavators in the 2,200 to 7,000 lb class. It mulches grass and brush up to 4 inches thick to a semi-mulched finish, using 16 Y-knife flail blades on an electronically balanced carrier with a rubber vibration dampener. Hydraulic hoses and couplers are included.

Need fitment or freight help before you order? Contact us.

Shipping & Freight

We ship to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO/DPO) addresses or outside the United States.

Smaller items ship by parcel carrier, priced by weight. Larger items and heavy equipment ship by LTL freight, priced by your ZIP code and the delivery type you choose: terminal pickup and dock delivery cost the least, and commercial liftgate, residential liftgate and jobsite delivery each add the carrier’s fee. Your shipping cost is shown at checkout before you pay.

The best way to get a shipping quote or ask a freight question is the Get a Freight Quote button on this page. You can also call (805) 398-6165.

Delivery types, delivery times, terminal pickup, liftgate service and damage inspection are covered in our Shipping Policy.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Type: Excavator flail mower
  • Cut Width: 30 in
  • Cutting Capacity: 4 in material
  • Blades: 16 Y-knife flail, 1 lb each
  • Blade Carrier: Electronically balanced with rubber vibration dampener
  • Housing: Curved, A572 Grade 50 steel
  • Skid Shoes: AR400
  • Drive Shaft: 4140 HT steel
  • Blade Tip Speed: 10,000 ft/min
  • Deck Height: 20 in
  • Overall Width: 43 in

Fitment / Machine Requirements

  • Carrier: Excavator, 2,200 to 7,000 lb class
  • Hydraulic Flow: 8 to 26 GPM
  • Maximum Pressure: 3,500 PSI
  • High Flow Required: No
  • Hydraulic Hoses, Couplers, and Mount: Included
  • Coupler: confirm with supplier


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns: within 30 days of delivery if unused and complete, with a restocking fee of up to 25% plus return freight. Returns need the manufacturer's agreement to take the item back; if they won't, the sale is final. Custom and made-to-order items are final sale. Full terms: Refund Policy.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Eterra EX-30M is a flail mower sized for excavators in the lighter weight classes, built for machines too light for the full-size EX Series. It hangs off the arm so an operator can mow and mulch grass and light brush along a bank, a fence line, or a tight lot, and finish the area cleanly in one pass. It chops the material fine for a semi-mulched finish, leaving smaller debris than a rotary mower of the same size.

Sixteen Y-knife flail blades spin on an electronically balanced carrier, and a rubber vibration dampener keeps the cut smooth on a light machine that would otherwise buck. A curved housing in A572 steel pulls material into the blades and keeps debris from packing up, while AR400 skid shoes take the ground wear. This is built for operators running lighter excavators in tight spots, where a balanced, low-vibration cut matters as much as the mulch it leaves.

Common Applications

  • Mowing and mulching grass and light brush on lighter excavators
  • Cleaning up banks, fence lines, and tight lots a full mower cannot fit
  • Finish mowing and trail work where a semi-mulched result matters

Selection Notes

  • Built for excavators in the 2,200 to 7,000 lb class, lighter than the EX Series' 7,000 lb and up range.
  • Runs 16 Y-knife flail blades and a rubber vibration dampener for a smoother cut on a light machine.
  • Hydraulic hoses, couplers, and a machine-specific mount are included.
  • Confirm the coupler and your machine's flow with the supplier before ordering.
Cutting Capacity
Cut width
30 in (762 mm)
Cutting capacity
4 in material
Minimum cut height
1 in (25 mm)
Blade type
Y-knife flail, 16 blades, 1 lb each
Build
Blade carrier
Electronically balanced
Vibration dampener
Rubber
Housing
Curved, minimizes debris buildup
Housing material
A572 Grade 50 steel
Drive shaft
4140 HT steel
Skid shoes
AR400
Motor
Permco gear drive
Hydraulics
Flow range
8-26 GPM
Maximum pressure
3,500 PSI
Machine Notes
Excavator weight class
2,200 to 7,000 lb
Blade tip speed
10,000 ft/min
Coupler face
Confirm with supplier
Dimensions & Weights
Deck height
20 in (508 mm)
Overall width
43 in (1092 mm)
RPM range
2,000-2,500 RPM
Weight
Confirm with supplier
Rubber vibration dampener
Keeps the cut smooth on a lighter excavator that would otherwise buck
Y-knife flail blades
Chop grass and brush fine for a semi-mulched finish with smaller debris

Included with Purchase

  • 1 Eterra EX-30M Flail Mower (variant/model as ordered)
  • Machine-specific mount
  • Hydraulic hoses and couplers

Not Included Unless Stated

  • Excavator carrier machine
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

EX Series Excavator Flail Mower | Eterra

Eterra Attachments
Original price $9,995.00 USD - Original price $10,495.00 USD
Original price
$9,995.00 USD - $10,495.00 USD
$9,995.00 USD - $10,495.00 USD
Current price $9,995.00 USD

The Eterra EX Series is an excavator flail mower that mulches grass, brush, and material up to 6 inches thick. Twenty Y-knife flail blades on an el...

View full details
Original price $9,995.00 USD - Original price $10,495.00 USD
Original price
$9,995.00 USD - $10,495.00 USD
$9,995.00 USD - $10,495.00 USD
Current price $9,995.00 USD

FMP780 Flail Mower | Baumalight

Baumalight
Original price $9,287.00 USD - Original price $9,287.00 USD
Original price
$9,287.00 USD
$9,287.00 USD - $9,287.00 USD
Current price $9,287.00 USD

The Baumalight FMP780 is a three-point-hitch flail mower for tractors, cutting an 87 in path over an 80 in rotor with 42 heavy F7000 flail teeth in...

View full details
Original price $9,287.00 USD - Original price $9,287.00 USD
Original price
$9,287.00 USD
$9,287.00 USD - $9,287.00 USD
Current price $9,287.00 USD

FMP260 Flail Mower | Baumalight

Baumalight
Original price $5,654.00 USD - Original price $5,794.00 USD
Original price
$5,654.00 USD - $5,794.00 USD
$5,654.00 USD - $5,794.00 USD
Current price $5,654.00 USD

The Baumalight FMP260 is a three-point-hitch flail mower for compact tractors, cutting a 72 in path over a 60 in rotor with 30 free-swinging flail ...

View full details
Original price $5,654.00 USD - Original price $5,794.00 USD
Original price
$5,654.00 USD - $5,794.00 USD
$5,654.00 USD - $5,794.00 USD
Current price $5,654.00 USD

FMM148 Mini Skid Steer Flail Mower | Baumalight

Baumalight
Original price $5,173.00 USD - Original price $6,488.75 USD
Original price
$5,173.00 USD - $6,488.75 USD
$5,173.00 USD - $6,488.75 USD
Current price $5,173.00 USD

The Baumalight FMM148 is a hydraulic flail mower for mini skid steers, cutting a 61 in path over a 48 in rotor with 30 free-swinging flail teeth of...

View full details
Original price $5,173.00 USD - Original price $6,488.75 USD
Original price
$5,173.00 USD - $6,488.75 USD
$5,173.00 USD - $6,488.75 USD
Current price $5,173.00 USD

FEB700 Flail Mower | Baumalight

Baumalight
Original price $10,897.00 USD - Original price $11,297.00 USD
Original price
$10,897.00 USD - $11,297.00 USD
$10,897.00 USD - $11,297.00 USD
Current price $10,897.00 USD

The Baumalight FEB700 is a hydraulic flail mower for universal-mount skid steers, cutting an 88 in path over an 80 in rotor with 42 free-swinging b...

View full details
Original price $10,897.00 USD - Original price $11,297.00 USD
Original price
$10,897.00 USD - $11,297.00 USD
$10,897.00 USD - $11,297.00 USD
Current price $10,897.00 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare