Skip to content
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support

MC-800 Propane Joint Hog Milling Machine | U.S. Saws

Brand U.S. SawsSKU SX77160WC
Original price $10,815.00 USD - Original price $10,815.00 USD
Original price
$10,815.00 USD
$10,815.00 USD - $10,815.00 USD
Current price $10,815.00 USD
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

The MC-800P Joint Hog is a walk-behind propane milling machine that removes spalled concrete joints up to 4 in wide and 1.75 in deep using closely spaced diamond blades. It also handles grooving, inlay cutting, and floor prep for permanent line striping, and runs a 16 HP Vanguard V-Twin certified propane engine with electric start.

Need fitment or freight help before you order? Contact us.

Shipping & Freight

We ship to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO/DPO) addresses or outside the United States.

Smaller items ship by parcel carrier, priced by weight. Larger items and heavy equipment ship by LTL freight, priced by your ZIP code and the delivery type you choose: terminal pickup and dock delivery cost the least, and commercial liftgate, residential liftgate and jobsite delivery each add the carrier’s fee. Your shipping cost is shown at checkout before you pay.

The best way to get a shipping quote or ask a freight question is the Get a Freight Quote button on this page. You can also call (805) 398-6165.

Delivery types, delivery times, terminal pickup, liftgate service and damage inspection are covered in our Shipping Policy.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 300 lbs
  • Engine: 16 HP Vanguard V-Twin, certified propane, electric start
  • Fuel Capacity: 20 lbs propane
  • Blade Shaft Speed: 5,850 RPM
  • Max Depth of Cut: 1.75 in with 8 in blades, fully adjustable
  • Max Cutting Width: up to 4 in
  • Cutting Speed: 2.5 ft per minute at 2 in wide by 1 in deep, full mill
  • Blade Diameter: 8 in
  • Blade Arbor: 1 in with drive pin hole
  • Recommended Dust Collector: 400+ CFM


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns: within 30 days of delivery if unused and complete, with a restocking fee of up to 25% plus return freight. Returns need the manufacturer's agreement to take the item back; if they won't, the sale is final. Custom and made-to-order items are final sale. Full terms: Refund Policy.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The MC-800P Joint Hog mills out spalled and deteriorated concrete joints for repair, and preps floors for grooving, inlays, and permanent line striping. Closely spaced diamond blades remove the failed concrete and leave a textured surface that is ready for fill material without further prep.

The machine stacks blades to match the job: eight blades mill a two-inch width, sixteen blades take the full four-inch width, and other spacings run for custom repairs. The blades cut in an up-cut direction and eject the millings into a vacuum plenum blade guard, and the certified propane V-Twin with a CO monitor keeps it legal to run on enclosed slabs. It rides on the same fully box-welded heavy gauge steel frame as the JS series joint saws, with a solid rear axle that doubles as the lifting pivot. This is the machine for concrete repair contractors who restore spalled joints and stripe-prep floors as production work.

Common Applications

  • Milling out spalled and deteriorated concrete joints for repair
  • Grooving and cutting inlays in concrete floors
  • Surface prep for permanent line striping

Selection Notes

  • Blade count sets the milled width: eight blades for narrow joint repair, sixteen for the full width
  • Wall clearance runs tight: the head mills within a few inches of walls at the front and side
  • Plan dust collection around a 400+ CFM extractor such as the Ultra Vac 1250-P
Unit Specifications
Engine
16 HP Vanguard V-Twin, certified propane, electric start
Fuel type
Propane
Fuel capacity
20 lbs
Blade shaft speed
5,850 RPM
CO monitor
Equipped
Cutting Capacity
Max depth of cut
1.75 in with 8 in blades, fully adjustable
Max cutting width
up to 4 in (16-blade configuration)
Cutting speed
2.5 ft per minute at 2 in wide by 1 in deep, full mill
Blade widths
.125 in, .150 in
Blade diameter
8 in
Blade arbor
1 in with drive pin hole
Build
Frame
Fully box-welded heavy gauge steel, JS series platform
Rear axle
Solid, serves as the lifting pivot point
Min wall clearance
7 in front, 3 in side
Machine Notes
Dust collection
400+ CFM extractor recommended
Country of manufacture
American-made
Dimensions & Weights
Weight
300 lb (136 kg)
Up-cut milling into a vacuum plenum guard
Captures millings and dust at the blade instead of scattering them
Certified propane engine with CO monitor
Runs on enclosed and occupied slabs where gas engines are barred
Box-welded JS series frame
A rigid platform that holds blade depth consistent across long runs

Included with Purchase

  • 1 MC-800 Propane Joint Hog Milling Machine (variant/model as ordered)

Not Included Unless Stated

  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

MC-60 Concrete Milling Machine | U.S. Saws

U.S. Saws
Original price $2,467.00 USD - Original price $2,467.00 USD
Original price
$2,467.00 USD
$2,467.00 USD - $2,467.00 USD
Current price $2,467.00 USD

The MC-60 is a portable electric milling machine for removing spalled concrete joints and surface repair work. A 15-amp Metabo W26-230 grinder driv...

View full details
Original price $2,467.00 USD - Original price $2,467.00 USD
Original price
$2,467.00 USD
$2,467.00 USD - $2,467.00 USD
Current price $2,467.00 USD

MC-1000 Propane Milling Machine | U.S. Saws

U.S. Saws
Original price $22,660.00 USD - Original price $22,660.00 USD
Original price
$22,660.00 USD
$22,660.00 USD - $22,660.00 USD
Current price $22,660.00 USD

The MC-1000 is a self-propelled, certified-propane joint clean-out saw and milling machine for removing failed joint fill and spalled concrete join...

View full details
Original price $22,660.00 USD - Original price $22,660.00 USD
Original price
$22,660.00 USD
$22,660.00 USD - $22,660.00 USD
Current price $22,660.00 USD

Mark-IV Dust Buggy Joint Clean-Out Saw | U.S. Saws

U.S. Saws
Original price $2,042.50 USD - Original price $2,042.50 USD
Original price
$2,042.50 USD
$2,042.50 USD - $2,042.50 USD
Current price $2,042.50 USD

The Mark-IV Dust Buggy is an electric walk-behind saw for cleaning out control joints, removing old joint filler, and making straight cuts in concr...

View full details
Original price $2,042.50 USD - Original price $2,042.50 USD
Original price
$2,042.50 USD
$2,042.50 USD - $2,042.50 USD
Current price $2,042.50 USD

JS-160 Propane Joint Clean-Out Saw | U.S. Saws

U.S. Saws
Original price $10,248.50 USD - Original price $10,248.50 USD
Original price
$10,248.50 USD
$10,248.50 USD - $10,248.50 USD
Current price $10,248.50 USD

The JS-160P is a certified-propane walk-behind joint clean-out saw that mills existing control joints for new fill or removes failed polyurea, epox...

View full details
Original price $10,248.50 USD - Original price $10,248.50 USD
Original price
$10,248.50 USD
$10,248.50 USD - $10,248.50 USD
Current price $10,248.50 USD

JS-131 Gas Joint Clean-Out Saw | U.S. Saws

U.S. Saws
Original price $4,774.25 USD - Original price $4,774.25 USD
Original price
$4,774.25 USD
$4,774.25 USD - $4,774.25 USD
Current price $4,774.25 USD

The JS-131 is a gas walk-behind joint clean-out saw for milling control joints, concrete sawing, and trench cutting. It runs dry diamond blades to ...

View full details
Original price $4,774.25 USD - Original price $4,774.25 USD
Original price
$4,774.25 USD
$4,774.25 USD - $4,774.25 USD
Current price $4,774.25 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare