Skip to content
American Quality | Freight Delivered Nationwide | U.S. Based Support
American Quality | Freight Delivered Nationwide | U.S. Based Support
MB25A Rebar Bender | Multiquip

MB25A Rebar Bender | Multiquip

Brand MultiquipSKU MB25A
$5,718.96 - $5,718.96
$5,718.96
$5,718.96 - $5,718.96
$5,718.96
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The MB25A is a bench-type rebar bender that takes bar up to 1 in through a 0 to 180 degree bend in about five seconds, driven by a 115 V single-phase motor at 13 amps. An angle adjustment knob sets the stopping angle and a standard foot switch runs the cycle, so both hands stay on the bar. This model is not currently available for sale or use in Canada.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

For an order containing products from a single brand, shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000 to $10,000: $347
  • Orders $10,000 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Ordering from more than one brand? Multi-brand orders ship on separate freight and are quoted individually rather than at the flat rate above. Place your order or contact us first and we will confirm total freight before anything is finalized.

Liftgate service is not included in these rates. If your delivery location has no loading dock or forklift to unload the freight from the truck, liftgate service is required and will be added to your shipping charge. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 227 lbs operating
  • Bar Capacity: 1 in (25.4 mm), No. 8
  • Bending Range: 0 to 180 degrees
  • Bending Speed: approximately 5 sec to 180 degrees
  • Power: 115 V, 60 Hz, single phase, 13 A
  • Overall Size: 21 x 19.5 x 17 in
  • Lead Time: confirm with supplier


Need full technical detail? See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

Bending reinforcing bar by hand is slow, and bending it consistently by hand is slower still, because every hook and every stirrup has to come off the bar at the same angle to fit the placement. The MB25A puts that work on a bench: bar goes between a roller and a collar, a foot switch starts the cycle, and the machine carries the bar around to a stop the operator has already set on the angle knob. It takes bar to No. 8 and turns a full 180 degrees in about five seconds.

The machine ships with five roller sizes and six collar sizes, which is what lets one bender cover the whole range of bar a job actually uses without a radius compromise; the supplier publishes the matching radius for every bar size from No. 3 to No. 8. Because the foot switch drives the cycle, the operator keeps both hands on the bar through the bend, which matters most on the long pieces that are awkward to hold and easy to mis-feed. This is built for the rebar shops and the precast yards bending bar to a schedule every day, not for the contractor who needs a hook once a season.

Common Applications

  • Bending reinforcing bar to hooks and stirrups in a shop or yard
  • Bending bar to a placement schedule on site
  • Producing repeat bends at one set angle across a batch of bar
  • Bending bar to a specified radius from No. 3 through No. 8

Selection Notes

  • The bender covers No. 3 through No. 8 bar, so match it against the heaviest bar on the schedule rather than the most common one
  • Rollers and collars set the bend radius, and the full set of five rollers and six collars is standard rather than an option, so the radius range is not something to price separately
  • At 227 lb this is a bench machine with lifting handles, not a machine to carry up a deck; plan a fixed station for it
  • This model is not currently available for sale or use in Canada
Unit Specifications
Max rebar diameter
1 in (25.4 mm)
Bending range
0 to 180 degrees
Max bending speed
Approximately 5 sec to 180 degrees
Electric motor
115 V, 60 Hz, single phase AC
Rated current
13 A
Angle control
Adjustable angle knob for fine tuning the bend angle
Cycle control
Standard foot switch, hands free at the bar
Build
Bending radius, No. 3 bar
3/8 in (9.5 mm) bar, 1.125 in (29 mm) radius
Bending radius, No. 4 bar
1/2 in (12.7 mm) bar, 1.5 in (38 mm) radius
Bending radius, No. 5 bar
5/8 in (15.9 mm) bar, 1.875 in (48 mm) radius
Bending radius, No. 6 bar
3/4 in (19 mm) bar, 2.25 in (57 mm) radius
Bending radius, No. 7 bar
7/8 in (22.2 mm) bar, 2.625 in (67 mm) radius
Bending radius, No. 8 bar
1 in (25.4 mm) bar, 3 in (76 mm) radius
Handling
Two built-in lifting handles
Accessories: To order any of these accessories, contact support@hardscapeheavy.com
Standard accessories
Foot switch, rollers in five sizes, collars in six sizes, tool kit and waterproof cover
Dimensions & Weights
Overall length
21 in (530 mm)
Overall width
19.5 in (500 mm)
Overall height
17 in (430 mm)
Operating weight
227 lb (103 kg)
Shipping weight
331 lb (150 kg)
Foot switch as standard
The bend runs while both hands stay on the bar, which is where they are needed on long pieces
Five rollers and six collars included
One machine covers every bar size from No. 3 to No. 8 at its published radius without buying tooling separately
Adjustable angle knob
A batch of bar comes off the machine at one repeatable angle instead of being eyeballed per piece

Included with Purchase

  • 1 MB25A Rebar Bender (variant/model as ordered)
  • Foot switch
  • Rollers, five sizes
  • Collars, six sizes
  • Tool kit
  • Waterproof cover

Not Included Unless Stated

  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare