Surface Preparation

The Viking is the largest machine in National's patented ride-on line and the only one built for outdoor work: roadways, bridge decks, airport runw...

The Rogue is National's newest all-electric walk-behind scraper, running 3 to 150 ft per minute with an orbital range of 600 to 2,000 RPM. Blade an...

The Power Hammer Trolley turns a hand-held power hammer into a walk-behind floor scraper. It fits the Hilti TE1000, weighs 99 lb, and folds to 19 b...

The P800 is a 32 in propane planetary grinder on a 27 HP engine, built for large surface preparation without a building supply. Its engine carries ...

The P650 is a fully geared 26 in propane planetary grinder and polisher running a 27 HP engine. It carries adjustable working pressure, Fast Change...

The M800 is a 32 in electric planetary grinder for large surface preparation, running a 20 HP motor on 230 V three phase. Automatic planetary lifti...

The M600 is a fully geared 23 in planetary grinder and polisher on 230 V, single or three phase, driven by a 5.5 HP motor. It carries adjustable wo...

The Helix is a 16 in planetary grinder on 120 V, built to come apart into several pieces so one person can carry it up a stair and fit it in any ve...

The DLS3000 sits between the machine and the DL3000 dust collector on the same hose and catches the bulk of the dust and debris before it reaches t...

The DL6000P is two collectors in one unit, 508 CFM combined and 318 CFM from either half on its own. The halves separate when a job needs two machi...

The DL4000P is the DL3000 in the same footprint with a reverse pulse compressor and pass-through power added. It moves 318 CFM on 230 V, cleans its...

The DL3000 is National's 318 CFM single-phase collector, a three-motor machine on a rugged steel frame running 230 V. Washable integrated filters s...

The DL2000 is the smallest collector in National's DL line, a 121.6 lb two-motor machine on a telescoping body that drops down for transport. Prima...

The A97 is the largest shot blaster in National's Apex series, a self-propelled variable-speed machine cutting a 10 in path at up to 2,000 sq ft pe...

The A96 is a self-propelled 8 in shot blaster running on 230 V single-phase power at 30 amps. Variable speed drive, a joystick handle and front and...

The A95 is the smallest shot blaster in National's Apex series, an 8 in manual walk-behind machine weighing 121 lbs. It runs on 115 V single-phase ...

The 99250 is National's 10 in three-phase scarifier, a 290 lb machine turning a 7.75 HP motor at 2,870 RPM on 230 V. It takes several types of remo...

The Spartan 220 is an 8 in walk-behind scarifier on 230 V single-phase power, turning a 2.99 HP motor at 3,440 RPM. It ships with a drum complete w...

The 8274-4 is an 18.5 in planetary grinder that preps and polishes concrete to a 3000-level polish on a 3 HP motor. A built-in soft start controls ...

The 8000 is National's largest propane rider, a 25 HP machine at 2,963 lb running up to 200 ft per minute. Dual-Lift slide plates control the blade...

The 7700 is the largest battery rider National builds, bigger, heavier and faster than the 5700 at 2,733 lb and up to 200 ft per minute. Twelve 200...

The 6280 Commander is a 425 lb soft goods scraper on a narrow 17.75 in footprint, running 10 to 45 ft per minute with an orbital head at 3,450 RPM....

The 6280HD Gladiator is the hard goods walk-behind, a 490 lb machine that takes up ceramic tile, wood floors and thin-set as well as soft coverings...

The 5700 is National's best selling ride-on scraper, narrow enough at 24.5 in to pass through a residential doorway and heavy enough at 2,244 lb to...