Skip to content
American Quality | Freight Delivered Nationwide | U.S. Based Support
American Quality | Freight Delivered Nationwide | U.S. Based Support

Dual Component Polymer Pump | U.S. Saws

Brand U.S. SawsSKU SX20150
Original price $6,592.00 - Original price $6,592.00
Original price
$6,592.00
$6,592.00 - $6,592.00
Current price $6,592.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Dual Component Polymer Pump dispenses polyurea and epoxy joint fillers from two 6.5 gallon semi-transparent tanks through a single-chain drive that holds the component ratio constant. It runs a 1/2 HP electric motor on 110 V and also dispenses certain polyaspartic floor coatings.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

For an order containing products from a single brand, shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000 to $10,000: $347
  • Orders $10,000 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Ordering from more than one brand? Multi-brand orders ship on separate freight and are quoted individually rather than at the flat rate above. Place your order or contact us first and we will confirm total freight before anything is finalized.

Liftgate service is not included in these rates. If your delivery location has no loading dock or forklift to unload the freight from the truck, liftgate service is required and will be added to your shipping charge. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 200 lbs
  • Drive: 1/2 HP electric motor, single-chain pump drive
  • Power Requirements: 110 V, 60 Hz; runs from a generator or deep-cycle battery with inverter
  • Tanks: two 6.5 gallon, semi-transparent, polyethylene or stainless
  • Component Ratio: 1:1 standard, 2:1 available
  • Compatible Materials: polyurea and epoxy joint fillers; certain polyaspartic coatings


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Dual Component Polymer Pump meters and dispenses two-component polyurea and epoxy joint fillers, holding the A-to-B ratio steady from the first joint to the last. Buying components in bulk instead of premixed cartridges is where the material savings come from, and U.S. Saws puts that saving at up to half of material cost.

A single chain drives both pumps, which is what locks the component ratio: the two sides cannot drift apart because one drive turns them. The 6.5 gallon tanks take a full 5 gallon pail per side with reserve to spare, their semi-transparent walls show the material level at a glance, and full-size lids open the tanks completely for cleaning. The dispensing wand carries variable speed and start-stop control at the operator's hand. This is for the flooring contractor running enough joint footage that bulk components and a constant ratio pay for the pump.

Common Applications

  • Filling concrete expansion joints with two-component polyurea
  • Filling control joints with epoxy joint fillers
  • Dispensing certain polyaspartic floor coatings

Selection Notes

  • Standard ratio is 1:1; order the 2:1 ratio configuration for materials that call for it
  • Semi-transparent tanks show remaining material without opening a lid
  • Single-operator steering with a T handle belongs to the One Man Polymer Pump; this unit is the ratio workhorse
Unit Specifications
Drive
1/2 HP electric motor, single-chain pump drive
Power requirements
110 V, 60 Hz
Alternate power
Gas generator, or deep cycle marine battery with inverter
Capacity
Tanks
Two 6.5 gal (24.6 L), semi-transparent, polyethylene or stainless
Component ratio
1:1 standard, 2:1 available
Compatible materials
Polyurea and epoxy joint fillers; certain polyaspartic floor coatings
Build
Frame
Steel
Manifold
Rebuildable one-piece aluminum dispensing manifold
Tank lids
Full-size, unrestricted interior access for cleaning
Wand
Variable speed with start and stop control
Dimensions & Weights
Weight
200 lb (91 kg)
Single-chain pump drive
The component ratio cannot drift because one chain turns both pumps
Bulk-component economics
Up to half off material cost against premixed cartridges, per U.S. Saws
Full-access tank lids
Cleaning reaches the whole tank interior instead of working blind through a port

Included with Purchase

  • 1 Dual Component Polymer Pump (variant/model as ordered)

Not Included Unless Stated

  • Generator or battery and inverter for cord-free operation
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

One Man Polymer Pump | U.S. Saws

U.S. Saws
Original price $6,952.50 - Original price $6,952.50
Original price
$6,952.50
$6,952.50 - $6,952.50
Current price $6,952.50

The One Man Polymer Pump dispenses polyurea and epoxy joint fillers under true one-person operation: the operator steers the pump with one hand and...

View full details
Original price $6,952.50 - Original price $6,952.50
Original price
$6,952.50
$6,952.50 - $6,952.50
Current price $6,952.50

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare