Name: Sickle Bar Mower | Eterra
Brand: Eterra Attachments
SKU: ETERRA-SICKLE-SS-7FT
Price: 13295.0 USD
Availability: InStock

Sickle Bar Mower | Eterra

Brand Eterra AttachmentsSKU ETERRA-SICKLE-SS-7FT

$13,295.00 - $14,340.00

$13,295.00

$13,295.00 - $14,340.00

$13,295.00

Shipping: LTL freight. Commercial delivery preferred.

Quantity

The Eterra Sickle Bar Mower is a skid steer attachment that cuts brush, hedges, and tall vegetation up to 2 inches in diameter. A gerotor-driven reciprocating sickle and an adjustable cutting angle let it trim banks, berms, and ditches, and a break-away bar protects the bar against rock and post strikes. Available in 7-foot and 9-foot cutter lengths.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

Orders up to $5,000: $279
Orders $5,000.01 to $10,000: $347
Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

Type: Skid steer sickle bar mower
Cutter Lengths: 7 ft, 9 ft
Cutting Capacity: 2 in material
Drive System: Gerotor motor with planetary gear drive
Tooth Style: Top serrated 2 in segment
Number of Teeth: 28 (7 ft), 36 (9 ft)
Adjustable Cutting Angle: 110 degrees down to 45 degrees
Break-away Bar: Built in

Fitment / Machine Requirements

Carrier: Skid steer
Hydraulic Flow: 15 to 20 GPM
Maximum Pressure: 3,500 PSI
High Flow Required: No
Electrical Connector: Required for skid steer models
Mount / Coupler: confirm with supplier

Need full technical detail? See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Eterra Sickle Bar Mower is a skid steer attachment for clearing brush, hedges, and overgrown vegetation along banks, berms, and ditches. It runs a reciprocating sickle bar off the machine's hydraulics and angles from level down past vertical, so an operator can trim a fence line or shape a ditch from the cab.

A gerotor motor with a planetary gear drive turns the heavy, non-clogging sickle, and a built-in break-away bar swings back when it meets a rock or post. This is built for road, farm, and orchard crews that keep miles of edge and trail clear and need a mower that survives the strikes that stop lighter units.

Common Applications

Cutting brush and tall grass along roadsides, fence lines, and trails
Trimming hedges, banks, and ditch lines
Trail and berm maintenance on farms, orchards, and road right-of-ways

Selection Notes

Available in 7-foot and 9-foot cutter lengths for skid steers.
Rated for skid steers supplying 15 to 20 GPM.
An electrical connector is required for skid steer models and is chosen in the buy box alongside the cutter length.
Four connectors are offered: Standard Switch Controls, 7-Pin for Bobcat, 8-Pin for Caterpillar and ASV or Terex, and 14-Pin for Bobcat, John Deere, Kubota and others.
The base row of each length is the mower alone and does not include a connector; the price of the connector chosen is added to it.
An adjustable angle from 110 degrees down to 45 degrees works banks, level ground, and ditches.
Confirm the mount and coupler for your machine with the supplier before ordering.

Cutting Capacity