Skip to content
American Quality | Delivery Across the Lower 48 | U.S. Based Support
American Quality | Delivery Across the Lower 48 | U.S. Based Support
Three-quarter view against white of a CAT 272D wheeled skid steer with the grey MS1160, its Baumalight MS1160 nameplate and stepped black push bar frame
Opposite three-quarter against white showing the MS1160 rotor and its mulcher rings across the full width
Three-quarter view against white of a CAT 272D wheeled skid steer with the grey MS1160, its Baumalight MS1160 nameplate and stepped black push bar frame
Opposite three-quarter against white showing the MS1160 rotor and its mulcher rings across the full width

MS1160 Brush Mulcher | Baumalight

Brand BaumalightSKU MS1160-C1130
$26,497.00 - $29,597.00
$26,497.00
$26,497.00 - $29,597.00
$26,497.00
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

Shipping: LTL freight. Commercial delivery preferred.

The Baumalight MS1160 is an 1100 series heavy duty skid steer mulcher with a 75 in path and a 19.3 in diameter rotor 60 in wide, carrying 31 sharpenable P11000 planer teeth and performance mulcher rings licensed by Denis Cimaf. It weighs 2,800 lb, cuts from 1.125 in above to 2.375 in below grade, and is sized for carriers from 7,000 lb.

Need fitment or freight help before you order? Contact our team.

Shipping & Freight

Delivery is available to the Lower 48 only; no shipping to Alaska, Hawaii or other US territories. Shipping is a flat rate based on your order total:

  • Orders up to $5,000: $279
  • Orders $5,000.01 to $10,000: $347
  • Orders $10,000.01 and over: $517

These rates cover standard freight delivery to a commercial address. After you place your order, our team will confirm your delivery timeline within 1 to 3 business days.

Liftgate service is required if your delivery location has no loading dock or forklift to unload the freight. If you are unsure whether you need it, contact us before ordering.

Commercial delivery locations are preferred when available. Residential delivery, limited-access locations, and appointment scheduling may affect handling and extend delivery time.

Lead times vary by product, manufacturer availability, and selected options. Some configured, special-order, or non-stock items require additional processing time before they ship.

Please inspect all freight shipments at delivery before signing. If you see visible damage, note it with the carrier and contact us as soon as possible.

If you need freight, delivery, or lead-time guidance before ordering, contact our team before you purchase.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 2800 lb, unit shipping weight
  • Freight Weight: 2,905 lb on every motor option offered
  • Path Width: 75 in
  • Rotor Width: 60 in
  • Rotor Diameter: 19.3 in at the tool tips
  • Rotor Weight: 860 lb with tools
  • Number of Cutters: 31
  • Tooth Part Number: P11000 sharpenable planer standard, R9000 carbide ripper optional
  • Tool Style: Sharpenable planer
  • Holder Style: Fixed

Fitment / Machine Requirements

  • Mount: Universal skidsteer
  • Minimum Carrier Weight: 7,000 lb
  • Cutting Depth: 1.125 in above to 2.375 in below grade
  • Case Drain: critical
  • Hydraulic Couplers: not included with the unit


Need full technical detail? See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns are governed by our store return policy. Because many products in this category involve freight shipping, special ordering, or configuration-specific selections, return eligibility may vary by product and condition. Special-order, custom-configured, used, damaged, or installed items may not be eligible for return.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The MS1160 is the 1100 series head, and it is built around a different cutting idea from the rest of the line. The rotor is 19.3 in across and carries only 31 tools, all of them sharpenable planer teeth, turning inside performance boosting mulcher rings licensed from Denis Cimaf. Fewer, larger, sharpenable tools on a bigger drum is what lets an average skid steer take down material well above what a fixed carbide head of the same width would manage. It also cuts deeper than anything else in this group, from 1.125 in above grade to 2.375 in below, which is the range that takes a stump down rather than around.

The tooling is the part worth thinking about before ordering, because it changes what the machine costs to run. These teeth are sharpened rather than thrown away, so a worn rotor goes back to work after a sharpening session instead of after a parts order. When the planer set is eventually spent, carbide ripper teeth fit the same holders and are bought separately, which is the tooth to move to for work with heavy ground contact. The frame is T1 alloy tool steel and is angled to roll back so the head engages a standing tree fully, the belt tensioner adjusts without an idler wheel that could wear out, and the rotor sits close to the carrier to keep the weight where a mid-size machine can hold it. One of the five motor options is a variable two-speed, which trades a fixed rotor speed for the ability to match speed and torque to what is in front of the head.

Common Applications

  • Land clearing where material size exceeds a fixed carbide head
  • Stump and root collar cutting below grade
  • Site reclamation on average size skid steers
  • Vegetation management with sharpenable tooling

Selection Notes

  • Match the head to the carrier by weight first: this model is charted against a minimum carrier weight of 7,000 lb.
  • Case drain is critical on this model and on every one of the five motor options, at every rated pressure. Confirm the carrier has a case drain line before ordering, or have one field installed.
  • Five motor options are offered. Four are bent axis piston motors charted against narrow flow bands; D117X2 is a variable two-speed motor charted across a much wider band, so its brush capacity depends heavily on the flow the carrier actually delivers.
  • The head ships with sharpenable P11000 planer teeth. R9000 carbide ripper teeth are bought separately and fitted once the planer set is worn, for work with heavy ground contact.
  • Hydraulic couplers are not supplied with this model and are ordered separately against the carrier, because the coupler face varies too widely.
  • Choose the motor option against the carrier's measured flow and pressure.
Mount & Interface
Mount
Universal skidsteer
Minimum carrier weight
7,000 lb (3,175 kg)
Hydraulic couplers
Not included
Cutting Capacity
Path width
75 in (1,905 mm)
Rotor width
60 in (1,524 mm)
Depth
1.125 in (29 mm) above to 2.375 in (60 mm) below
Rotor & Teeth
Rotor diameter at tool tips
19.3 in (490 mm)
Rotor weight with tools
860 lb (390 kg)
Number of cutters
31
Holder style
Fixed
Tool style
Sharpenable planer
Tooth part number, standard
P11000 sharpenable planer
Tooth part number, optional
R9000 carbide ripper
Mulcher rings
Licensed from Denis Cimaf
Build
Frame
T1 alloy tool steel sheet metal
Drive belt
Heavy duty reinforced, gearbox to rotor
Belt tensioner
Adjustable, no idler wheel
Weight management
Rotor set close to the carrier
Operator visibility
Improved sightline to the cutting area
Protection & Controls
Pressure gauge
Standard, large
Chain curtain
3/8 in (10 mm) thick, rear guard
Wire kit
Protects the rotor shaft from fence wire
Skid shoes
Adjustable
Push bar
Integrated
Frame angle
Rolls back to fell standing trees
Case pressure gauge
Max 250 psi, do not exceed
Hydraulics
Motor type
Bent axis piston or two speed
Motor options
C1130, C1140, C1150, C1170, D117X2
Charted flow range
20 to 75 GPM
Rated pressures
2,500, 3,000, 3,500 and 4,000 psi
Case drain
Critical, every option
Stop and chew
Doubles the charted brush sizes
Charted GPM figures
Under load flow estimates
Dimensions & Weights
Unit shipping weight
2,800 lb (1,270 kg)
Freight weight, all motors
2,905 lb (1,318 kg)
Shipping size, all motors
80 x 43 x 68 in (2,032 x 1,092 x 1,727 mm)
Dimensional weight, all motors
1,410 lb (640 kg)
Motor Option C1130, 20 to 30 GPM: Maximum brush cutting sizes, brush diameter in inches
Rated pressureCase drain20 GPM25 GPM30 GPM
Rotor speed1,450 rpm1,800 rpm2,100 rpm
2,500 psiCritical4.5 in5.5 in6.5 in
3,000 psiCritical5 in6 in7 in
3,500 psiCritical5.5 in6.5 in7.5 in
4,000 psiCritical6.5 in7 in8 in
Motor Option C1140, 25 to 35 GPM: Maximum brush cutting sizes, brush diameter in inches
Rated pressureCase drain25 GPM30 GPM35 GPM
Rotor speed1,500 rpm1,800 rpm2,100 rpm
2,500 psiCritical6.25 in8.25 in8.5 in
3,000 psiCritical6.75 in8.5 in9 in
3,500 psiCritical7.25 in8.75 in9.5 in
4,000 psiCritical7.75 in9 in10 in
Motor Option C1150, 30 to 40 GPM: Maximum brush cutting sizes, brush diameter in inches
Rated pressureCase drain30 GPM35 GPM40 GPM
Rotor speed1,600 rpm1,875 rpm2,140 rpm
2,500 psiCritical8.5 in10 in10.5 in
3,000 psiCritical9 in10.5 in11 in
3,500 psiCritical9.5 in11 in11.5 in
4,000 psiCritical9.75 in11.5 in12 in
Motor Option C1170, 35 to 50 GPM: Maximum brush cutting sizes, brush diameter in inches
Rated pressureCase drain35 GPM40 GPM45 GPM50 GPM
Rotor speed1,400 rpm1,630 rpm1,830 rpm2,030 rpm
2,500 psiCritical9.5 in10 in11.5 in12 in
3,000 psiCritical10 in10.5 in12 in12.5 in
3,500 psiCritical11.5 in11 in12.5 in13 in
4,000 psiCritical12 in11.5 in13 in13.5 in
Motor Option D117X2, 20 to 75 GPM: Maximum brush cutting sizes, brush diameter in inches
Rated pressureCase drain20 GPM25 GPM30 GPM35 GPM40 GPM45 GPM50 GPM55 GPM60 GPM65 GPM70 GPM75 GPM
Rotor speedAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustable
2,500 psiCritical5.5 in7.75 in10.5 in12.5 in13 in14.25 in15.5 in17.5 in18 in19 in20 in21 in
3,000 psiCritical6.25 in8.25 in11.25 in13 in13.75 in15 in16.25 in18 in18.75 in19.75 in20.75 in21.75 in
3,500 psiCritical6.75 in9 in11.5 in13.5 in14.25 in15.5 in16.75 in18.75 in19.25 in20.25 in21.25 in22.25 in
4,000 psiCritical8 in9.5 in12 in14.25 in15 in16.25 in18 in19.25 in20.5 in21.5 in22.5 in23.5 in
19.3 in rotor running 31 P11000 tools
Fewer, larger tools on a bigger drum take material well above what a fixed carbide head of the same width manages
Sharpenable planer teeth
Tools are resharpened rather than replaced, and carbide rippers fit the same holders once the planer set is worn
Licensed Denis Cimaf mulcher rings
Performance boosting rings no other head in the brand carries
Deepest below-grade reach in the group
Takes a stump down rather than around it
Variable two-speed motor option
Rotor speed and torque are matched to changing material instead of being fixed at order
3/8 in chain curtain and wire kit
Standing brush enters and mulched debris exits at the rear, and the rotor shaft is protected from fence wire

Included with Purchase

  • 1 MS1160 Brush Mulcher with the selected motor option, C1130 through D117X2
  • P11000 sharpenable planer teeth fitted
  • Wire protection kit
  • Chain curtain

Not Included Unless Stated

  • Hydraulic couplers, which Baumalight does not supply because carrier fittings vary too widely
  • R9000 carbide ripper teeth, which are purchased separately
  • Carrier machine
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

ISH3P raised against a blue sky with the jaw open, snow on the frame and the Incisor decal visible
ISH3P tree puller mounted on a New Holland L225 skid steer against a white background, the serrated jaw at ground level

ISH3P Skid Steer Tree Puller | Baumalight

Baumalight
$2,757.00 - $2,757.00
$2,757.00
$2,757.00 - $2,757.00
$2,757.00

The Baumalight ISH3P is a skid steer tree puller with a hydraulic jaw, gripping stems up to 4 in in diameter and lifting them out of the ground wit...

View full details
$2,757.00 - $2,757.00
$2,757.00
$2,757.00 - $2,757.00
$2,757.00
Studio three-quarter against white of a CAT 272D skid steer with the FEB700, the flail knives and the integrated skid shoes in view
Studio three-quarter against white of a CAT skid steer carrying the light grey FEB700, Baumalight lettering across the hood and flail knives along the rotor

FEB700 Flail Mower | Baumalight

Baumalight
$10,897.00 - $11,297.00
$10,897.00 - $11,297.00
$10,897.00 - $11,297.00
$10,897.00

The Baumalight FEB700 is a hydraulic flail mower for universal-mount skid steers, cutting an 88 in path over an 80 in rotor with 42 free-swinging b...

View full details
$10,897.00 - $11,297.00
$10,897.00 - $11,297.00
$10,897.00 - $11,297.00
$10,897.00
Storm 48 inch mini brush cutter from the side on a shop floor, showing the low deck profile and coiled hoses
Storm 48 inch mini brush cutter, studio view showing the deck, hydraulic motor housing, hoses, and side push bar

Mini Brush Cutter 48" | Storm

Storm Attachments
$5,542.00 - $5,613.00
$5,542.00 - $5,613.00
$5,542.00 - $5,613.00
$5,542.00

Storm 48 in hydraulic brush cutter for mini skid steers, skid steers, and compact track loaders, cutting material up to 3 in on standard flow (7-15...

View full details
$5,542.00 - $5,613.00
$5,542.00 - $5,613.00
$5,542.00 - $5,613.00
$5,542.00

Extreme Duty Tree Saw (38 in) | Maxx

Maxx Attachments
$18,900.00 - $24,900.00
$18,900.00 - $24,900.00
$18,900.00 - $24,900.00
$18,900.00

The Maxx Attachments Extreme Duty Tree Saw is a skid steer disk saw for fast tree and brush clearing in hardwoods and softwoods. A 38 in disk with ...

View full details
$18,900.00 - $24,900.00
$18,900.00 - $24,900.00
$18,900.00 - $24,900.00
$18,900.00

20 in Ranch Axe Tree Shear | Maxx

Maxx Attachments
$18,500.00 - $18,500.00
$18,500.00
$18,500.00 - $18,500.00
$18,500.00

The Maxx Attachments 20 in Ranch Axe Tree Shear is a near-ground-level tree shear for skid steer loaders, built for pasture cleanup and clearing mo...

View full details
$18,500.00 - $18,500.00
$18,500.00
$18,500.00 - $18,500.00
$18,500.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare