Skip to content
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support

Sickle Bar Mower | Eterra

Brand Eterra AttachmentsSKU ETERRA-SICKLE-SS-7FT
Original price $13,295.00 USD - Original price $14,340.00 USD
Original price
$13,295.00 USD
$13,295.00 USD - $14,340.00 USD
Current price $13,295.00 USD
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

The Eterra Sickle Bar Mower is a skid steer attachment that cuts brush, hedges, and tall vegetation up to 2 inches in diameter. A gerotor-driven reciprocating sickle and an adjustable cutting angle let it trim banks, berms, and ditches, and a break-away bar protects the bar against rock and post strikes. Available in 7-foot and 9-foot cutter lengths.

Need fitment or freight help before you order? Contact us.

Shipping & Freight

We ship to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO/DPO) addresses or outside the United States.

Smaller items ship by parcel carrier, priced by weight. Larger items and heavy equipment ship by LTL freight, priced by your ZIP code and the delivery type you choose: terminal pickup and dock delivery cost the least, and commercial liftgate, residential liftgate and jobsite delivery each add the carrier’s fee. Your shipping cost is shown at checkout before you pay.

The best way to get a shipping quote or ask a freight question is the Get a Freight Quote button on this page. You can also call (805) 398-6165.

Delivery types, delivery times, terminal pickup, liftgate service and damage inspection are covered in our Shipping Policy.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Type: Skid steer sickle bar mower
  • Cutter Lengths: 7 ft, 9 ft
  • Cutting Capacity: 2 in material
  • Drive System: Gerotor motor with planetary gear drive
  • Tooth Style: Top serrated 2 in segment
  • Number of Teeth: 28 (7 ft), 36 (9 ft)
  • Adjustable Cutting Angle: 110 degrees down to 45 degrees
  • Break-away Bar: Built in

Fitment / Machine Requirements

  • Carrier: Skid steer
  • Hydraulic Flow: 15 to 20 GPM
  • Maximum Pressure: 3,500 PSI
  • High Flow Required: No
  • Electrical Connector: Required for skid steer models
  • Mount / Coupler: confirm with supplier


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns: within 30 days of delivery if unused and complete, with a restocking fee of up to 25% plus return freight. Returns need the manufacturer's agreement to take the item back; if they won't, the sale is final. Custom and made-to-order items are final sale. Full terms: Refund Policy.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Eterra Sickle Bar Mower is a skid steer attachment for clearing brush, hedges, and overgrown vegetation along banks, berms, and ditches. It runs a reciprocating sickle bar off the machine's hydraulics and angles from level down past vertical, so an operator can trim a fence line or shape a ditch from the cab.

A gerotor motor with a planetary gear drive turns the heavy, non-clogging sickle, and a built-in break-away bar swings back when it meets a rock or post. This is built for road, farm, and orchard crews that keep miles of edge and trail clear and need a mower that survives the strikes that stop lighter units.

Common Applications

  • Cutting brush and tall grass along roadsides, fence lines, and trails
  • Trimming hedges, banks, and ditch lines
  • Trail and berm maintenance on farms, orchards, and road right-of-ways

Selection Notes

  • Available in 7-foot and 9-foot cutter lengths for skid steers.
  • Rated for skid steers supplying 15 to 20 GPM.
  • An electrical connector is required for skid steer models and is chosen in the buy box alongside the cutter length.
  • Four connectors are offered: Standard Switch Controls, 7-Pin for Bobcat, 8-Pin for Caterpillar and ASV or Terex, and 14-Pin for Bobcat, John Deere, Kubota and others.
  • The base row of each length is the mower alone and does not include a connector; the price of the connector chosen is added to it.
  • An adjustable angle from 110 degrees down to 45 degrees works banks, level ground, and ditches.
  • Confirm the mount and coupler for your machine with the supplier before ordering.
Cutting Capacity
Cutting capacity
2 in material
Tooth style
Top serrated 2 in segment
Adjustable cutting angle
110 degrees down to 45 degrees
Build
Drive system
Gerotor motor with planetary gear drive
Break-away bar
Built in, protects against rock and post strikes
Sickle
Heavy, non-clogging
Hydraulics
Flow range
15-20 GPM
Maximum pressure
3,500 PSI
Machine Notes
Rated machine pressure
3,000 PSI
Reach with arms raised
Over 17 ft
Coupler face
Confirm with supplier
Cutter lengths
Cutter LengthNumber of TeethDrive SystemWeight
7 ft28Gerotor motor with planetary gear drive780 lb (354 kg)
9 ft36Gerotor motor with planetary gear drive950 lb (431 kg)
Break-away bar
Swings back on impact with rocks or posts to limit damage and downtime
Adjustable cutting angle
Sets from 110 degrees down to 45 degrees to cut banks, berms, and ditches

Included with Purchase

  • 1 Eterra Sickle Bar Mower (variant/model as ordered)

Not Included Unless Stated

  • Skid steer carrier machine
  • Electrical connector (required for skid steer models)
  • Machine mount
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

Mini Skid Steer Sickle Bar Mower | Eterra

Eterra Attachments
Original price $7,595.00 USD - Original price $8,890.00 USD
Original price
$7,595.00 USD - $8,890.00 USD
$7,595.00 USD - $8,890.00 USD
Current price $7,595.00 USD

The Eterra Mini Skid Steer Sickle Bar Mower cuts grass, brush and standing vegetation with a scissor action rather than a rotor. A 5 ft cutter bar ...

View full details
Original price $7,595.00 USD - Original price $8,890.00 USD
Original price
$7,595.00 USD - $8,890.00 USD
$7,595.00 USD - $8,890.00 USD
Current price $7,595.00 USD

Excavator Sickle Bar Mower | Eterra

Eterra Attachments
Original price $5,095.00 USD - Original price $10,490.00 USD
Original price
$5,095.00 USD - $10,490.00 USD
$5,095.00 USD - $10,490.00 USD
Current price $5,095.00 USD

The Eterra Excavator Sickle Bar Mower cuts brush and tall vegetation up to 2 inches in diameter from the end of an excavator's arm. It runs a gerot...

View full details
Original price $5,095.00 USD - Original price $10,490.00 USD
Original price
$5,095.00 USD - $10,490.00 USD
$5,095.00 USD - $10,490.00 USD
Current price $5,095.00 USD

Mini Brush Cutter 48" | Storm

Storm Attachments
Original price $5,930.00 USD - Original price $6,006.00 USD
Original price
$5,930.00 USD - $6,006.00 USD
$5,930.00 USD - $6,006.00 USD
Current price $5,930.00 USD

Storm 48 in hydraulic brush cutter for mini skid steers, skid steers, and compact track loaders, cutting material up to 3 in on standard flow (7-15...

View full details
Original price $5,930.00 USD - Original price $6,006.00 USD
Original price
$5,930.00 USD - $6,006.00 USD
$5,930.00 USD - $6,006.00 USD
Current price $5,930.00 USD

HD Brush Cutter 72" | Storm

Storm Attachments
Original price $7,106.00 USD - Original price $7,177.00 USD
Original price
$7,106.00 USD - $7,177.00 USD
$7,106.00 USD - $7,177.00 USD
Current price $7,106.00 USD

Storm 72 in hydraulic brush cutter for skid steers and compact track loaders, cutting material up to 7 in on standard flow (15-25 GPM). A 1/4 in de...

View full details
Original price $7,106.00 USD - Original price $7,177.00 USD
Original price
$7,106.00 USD - $7,177.00 USD
$7,106.00 USD - $7,177.00 USD
Current price $7,106.00 USD

Brush Cutter 60" | Storm

Storm Attachments
Original price $6,234.00 USD - Original price $6,310.00 USD
Original price
$6,234.00 USD - $6,310.00 USD
$6,234.00 USD - $6,310.00 USD
Current price $6,234.00 USD

Storm 60 in hydraulic brush cutter for skid steers and compact track loaders, cutting material up to 4 in on standard flow (7-17 GPM). A 3/16 in de...

View full details
Original price $6,234.00 USD - Original price $6,310.00 USD
Original price
$6,234.00 USD - $6,310.00 USD
$6,234.00 USD - $6,310.00 USD
Current price $6,234.00 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare