Eterra Attachments

The Eterra Telescopic Auger Extension is an adjustable 72 inch auger extension for 2 inch hex output shafts. A pin slides the auger hub to a new ho...

The Eterra Stinger Spiral Splitter converts an auger drive into a log splitter. Its specialized spiral amplifies splitting force so less effort is ...

Eterra Hex Auger Extensions add depth to an auger setup. They are fixed-length extensions on a 2 inch hex in and out, built with wave pattern welds...

The Eterra Auger Stump Planer turns an auger drive into a stump removal tool. It fits a 2 inch hex output, carries three replaceable and re-sharpen...

Eterra Auger Adapters join an auger drive to a bit, extension or accessory whose shaft type does not match. They are offered in five connection sty...

The Eterra Excavator Sickle Bar Mower cuts brush and tall vegetation up to 2 inches in diameter from the end of an excavator's arm. It runs a gerot...

The Eterra Cement Mixer Bowl is a mixing bowl driven by an Eterra auger drive. It mounts through a 2 inch hex coupler at the base of the bowl and i...

Eterra Earth Auger Bits are 2 inch hex drive auger bits for skid steer and mini skid steer auger drives. They run 48 inches long in diameters from ...

The Eterra E40 Mini Skid Steer Backhoe is a fixed 4 foot boom backhoe attachment for mini skid steers. It digs to 48 inches with a 52 inch overall ...

The Eterra Vortex excavator stump grinder cuts 18 inches below ground on a 27 inch wheel carrying 12 teeth, driven by a hydraulic radial piston mot...

The Eterra PDX-1000 excavator post driver drives fence, guardrail, and sign posts from the excavator arm, with 1,000 ft-lb of energy class and 32,0...

The Eterra Mini Skid Steer Sickle Bar Mower cuts grass, brush and standing vegetation with a scissor action rather than a rotor. A 5 ft cutter bar ...

The Eterra Mini Skid Steer Auger Drive turns a mini skid steer into a post hole driller. It is a hydraulic auger drive with a 2 in hex output shaft...

The Eterra Sidewinder is a flail mower for mini skid steers. An open-face, deep cutter housing and 20 one-pound Y-knife blades cut grass and tangle...

The Eterra Hurricane Mini Skid Steer Concrete Mixer is a hydraulic drum mixer for mini skid steers. It mixes 3.53 cu ft of material behind a heavy-...

The Eterra Universal Excavator Mount is an adjustable mounting system that fits excavators with 30 to 50mm pins and works with any Eterra attachmen...

The Eterra Cyclone is an excavator rotary brush cutter that cuts brush and small trees up to 10 inches across. A diamond-shaped T1 steel blade carr...

The Eterra Excavator Auger Drive is a hydraulic powerhead that bores holes for posts, footings, and fence-line work from an excavator. It comes in ...

The Eterra EX Series is an excavator flail mower that mulches grass, brush, and material up to 6 inches thick. Twenty Y-knife flail blades on an el...

The Eterra EX-30M is a flail mower built for excavators in the 2,200 to 7,000 lb class. It mulches grass and brush up to 4 inches thick to a semi-m...

The Eterra PDX-1000 is a breaker-style, nitrogen-charged post driver for skid steers, built for fencing contractors. It drives wood and steel posts...

The Eterra Auger Drive is a hydraulic powerhead for skid steers that turns a 2-inch hex bit to bore holes for posts, footings, and decks, available...

The Eterra Vortex is a skid steer stump grinder driven by a high-torque hydraulic radial piston motor. A direct-drive, oil-bath hub removes externa...

The Eterra Surge Grapple is a dual-arm skid steer grapple rake for clearing brush, rock, and debris on land-clearing jobs. It is built from 3/4-inc...