Skip to content
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support

Extreme Duty Skid-Steer Bucket | Star Industries

Brand Star IndustriesSKU XD-72
Original price $2,946.00 USD - Original price $3,832.00 USD
Original price
$2,946.00 USD
$2,946.00 USD - $3,832.00 USD
Current price $2,946.00 USD
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

The Star Industries Extreme Duty Skid-Steer Bucket is built around a 25 percent heavier shell, an AR400 heel plate and AR400 wear bars, with a 1 in x 8 in cutting edge. Four widths from 72 in to 96 in, 18.2 to 24.2 cubic feet heaped, all on the universal quick-tach.

Need fitment or freight help before you order? Contact us.

Shipping & Freight

We ship to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO/DPO) addresses or outside the United States.

Smaller items ship by parcel carrier, priced by weight. Larger items and heavy equipment ship by LTL freight, priced by your ZIP code and the delivery type you choose: terminal pickup and dock delivery cost the least, and commercial liftgate, residential liftgate and jobsite delivery each add the carrier’s fee. Your shipping cost is shown at checkout before you pay.

The best way to get a shipping quote or ask a freight question is the Get a Freight Quote button on this page. You can also call (805) 398-6165.

Delivery types, delivery times, terminal pickup, liftgate service and damage inspection are covered in our Shipping Policy.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Widths: 72 in, 78 in, 84 in and 96 in outside
  • Heaped Capacity: 18.2 to 24.2 cu ft by width
  • Cutting Edge: 1 in x 8 in
  • Heel Plate: 1/2 in AR400
  • Scuff Bars: 1/2 in thick
  • Shell: 25 percent heavier than the heavy duty build, rolled for clean-out
  • Height and Depth: 24 in high x 34 in deep, all widths
  • Empty Weights: 717 lb to 922 lb by width

Fitment / Machine Requirements

  • Mount: universal quick-tach, 3/8 in plate steel
  • Bucket Profile: built to the specific make and model of skid-steer loader
  • Minimum Carrier Rated Operating Capacity: confirm with supplier


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns: within 30 days of delivery if unused and complete, with a restocking fee of up to 25% plus return freight. Returns need the manufacturer's agreement to take the item back; if they won't, the sale is final. Custom and made-to-order items are final sale. Full terms: Refund Policy.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

The Star Industries Extreme Duty Skid-Steer Bucket is the build for work that destroys ordinary buckets. The shell carries 25 percent more steel than the heavy duty bucket in the same range, the heel plate and the wear bars are AR400, and the cutting edge is 1 in by 8 in, which is 80 percent heavier than the edge the standard bucket runs.

Seams are welded continuously inside and outside, and a reinforced hat section runs the full width across the top with steel side blades protecting the sides. The square bottom sets close to the ground so the operator can back-drag to level, and the low profile lets the leading edge stay visible from the seat. The shell is rolled rather than folded, which is what makes it empty cleanly. This is for demolition, rock and recycled-material work where the bucket is the wearing part.

Common Applications

  • Loading rock, rubble and recycled aggregate
  • Demolition clean-up and debris handling
  • Back-dragging and levelling on prepared ground
  • High-abrasion yard and transfer-station work

Selection Notes

  • Four widths, 72 in to 96 in, at 24 in high and 34 in deep throughout
  • Buckets are built to the profile of the specific loader make and model, so state yours when ordering
  • A bolt-on blade and pin-on teeth are supplier options; the toothed XD models are held unpriced and are recorded in missing
  • Confirm your carrier's rated operating capacity before ordering
Build
Shell
25 percent heavier than the heavy duty build, rolled for clean-out
Cutting edge
1 in x 8 in, 80 percent heavier than the standard edge
Heel plate
1/2 in AR400
Wear bars
AR400
Scuff bars
1/2 in thick
Hat section
Reinforced, full width across the top of the bucket
Side blades
Steel, strengthening and protecting the bucket sides
Seams
Continuous weld inside and outside the shell seams
Bottom
Square, sets close to the ground for back-dragging
Profile
Low profile, leading edge visible from the seat
Mount & Interface
Mount
Universal quick-tach
Quick-tach plate
3/8 in plate steel
Loader fit
Built to match the specific make and model of skid-steer loader
Accessories
Bolt-on blade
Reversible 5/8 in x 8 in punched blade, stated by the supplier to give three times the wear
Teeth
Pin-on series 23 teeth measuring 2-1/4 in across the point
Side cutting teeth
Bolt-on
ModelWidth IDWidth ODHeight ODDepth ODHeaped capacityWeight
XD-7270-1/2 in72 in (1829 mm)24 in34 in18.2 cu ft717 lb (325 kg)
XD-7876-1/2 in78 in (1981 mm)24 in34 in18.7 cu ft764 lb (347 kg)
XD-8482-1/2 in84 in (2134 mm)24 in34 in21.2 cu ft787 lb (357 kg)
XD-9694-1/2 in96 in (2438 mm)24 in34 in24.2 cu ft922 lb (418 kg)
AR400 heel plate and wear bars
Puts the abrasion-resistant steel where the bucket actually wears out
1 in x 8 in cutting edge
An 80 percent heavier edge than the standard bucket carries, so the leading edge lasts through rock and rubble
Square bottom
Sets close to the ground so the operator can back-drag to level without a second pass

Included with Purchase

  • 1 Extreme Duty Skid-Steer Bucket (variant/model as ordered)

Not Included Unless Stated

  • Skid steer loader
  • Bolt-on blade, pin-on teeth and bolt-on side cutting teeth
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

General Purpose Bucket | Maxx

Maxx Attachments
Original price $1,785.00 USD - Original price $2,980.00 USD
Original price
$1,785.00 USD - $2,980.00 USD
$1,785.00 USD - $2,980.00 USD
Current price $1,785.00 USD

The Maxx Attachments General Purpose Bucket is a heavy-duty loading bucket for skid steers and small wheel loaders, built with A-572 steel, A-514 w...

View full details
Original price $1,785.00 USD - Original price $2,980.00 USD
Original price
$1,785.00 USD - $2,980.00 USD
$1,785.00 USD - $2,980.00 USD
Current price $1,785.00 USD

Dirt Bucket | Top Dog

Top Dog Attachments
Original price $1,678.57 USD - Original price $2,000.00 USD
Original price
$1,678.57 USD - $2,000.00 USD
$1,678.57 USD - $2,000.00 USD
Current price $1,678.57 USD

A heavy-built dirt bucket for digging, loading, and carrying soil, gravel, sand, and loose fill, with reinforced skid plates for daily ground contact.

Original price $1,678.57 USD - Original price $2,000.00 USD
Original price
$1,678.57 USD - $2,000.00 USD
$1,678.57 USD - $2,000.00 USD
Current price $1,678.57 USD

Extreme General Purpose Bucket | Glacier

Glacier Attachments
Original price $1,747.00 USD - Original price $2,280.00 USD
Original price
$1,747.00 USD - $2,280.00 USD
$1,747.00 USD - $2,280.00 USD
Current price $1,747.00 USD

Glacier Extreme general-purpose material bucket for skid steers and compact track loaders. HD 3/16" body with 1/2" bolted wear plates, 1/2" x 5" we...

View full details
Original price $1,747.00 USD - Original price $2,280.00 USD
Original price
$1,747.00 USD - $2,280.00 USD
$1,747.00 USD - $2,280.00 USD
Current price $1,747.00 USD

Mini Skid Steer Buckets | Arrow

Arrow Material Handling Products
Original price $1,094.44 USD - Original price $1,675.00 USD
Original price
$1,094.44 USD - $1,675.00 USD
$1,094.44 USD - $1,675.00 USD
Current price $1,094.44 USD

Arrow Mini Skid Steer Buckets for walk-behind and mini track loaders, in four widths on a mini universal or Bobcat mount. Quarter inch shell and en...

View full details
Original price $1,094.44 USD - Original price $1,675.00 USD
Original price
$1,094.44 USD - $1,675.00 USD
$1,094.44 USD - $1,675.00 USD
Current price $1,094.44 USD

Extreme High Capacity Material Bucket | Glacier

Glacier Attachments
Original price $2,280.00 USD - Original price $3,040.00 USD
Original price
$2,280.00 USD - $3,040.00 USD
$2,280.00 USD - $3,040.00 USD
Current price $2,280.00 USD

Glacier Extreme high-capacity material bucket, built to the General Purpose spec but larger for high-volume work on large track machines and teleha...

View full details
Original price $2,280.00 USD - Original price $3,040.00 USD
Original price
$2,280.00 USD - $3,040.00 USD
$2,280.00 USD - $3,040.00 USD
Current price $2,280.00 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare