Attachments

The Eterra Excavator Sickle Bar Mower cuts brush and tall vegetation up to 2 inches in diameter from the end of an excavator's arm. It runs a gerot...

The Eterra Cement Mixer Bowl is a mixing bowl driven by an Eterra auger drive. It mounts through a 2 inch hex coupler at the base of the bowl and i...

Eterra Earth Auger Bits are 2 inch hex drive auger bits for skid steer and mini skid steer auger drives. They run 48 inches long in diameters from ...

The Eterra E40 Mini Skid Steer Backhoe is a fixed 4 foot boom backhoe attachment for mini skid steers. It digs to 48 inches with a 52 inch overall ...

The Eterra Vortex excavator stump grinder cuts 18 inches below ground on a 27 inch wheel carrying 12 teeth, driven by a hydraulic radial piston mot...

The Eterra PDX-1000 excavator post driver drives fence, guardrail, and sign posts from the excavator arm, with 1,000 ft-lb of energy class and 32,0...

The Star Industries Skid Steer Trash Hopper attaches directly to the loader for waste and loose material handling, in 48 in, 72 in and 84 in widths...

The Star Industries Skid Steer Power Rake is a 72 in bi-directional carbide-tooth drum on a floating frame, with the drive motor set inside the dru...

The Star Industries Skid Steer Grapple Bucket is a solid-bottom bucket with two independently operating grapple arms, opening 38-1/2 in on Heavy Du...

The Star Industries Skid Steer Brush Cutter is a 72 in open-front cutter running three bi-directional 5/8 in AR400 blades on a high torque motor an...

The Star Industries Root Grapple Bucket handles brush, logs and rock with independently operating hydraulic cylinders and a separated tine bottom t...

The Star Industries Trailer Spotter puts a standard 2 in square hitch receiver on a skid steer, so a yard can move trailers and trailer-mounted equ...

The Star Industries Skid Steer Concrete Placement Bucket carries and places concrete where a truck chute will not reach. No moving parts and no gat...

The Star Industries Heavy Duty Skid Steer Bucket is a low profile dirt bucket in five widths from 60 in to 84 in, 15.0 to 21.0 cubic feet heaped, w...

The Star Industries Extreme Duty Skid-Steer Bucket is built around a 25 percent heavier shell, an AR400 heel plate and AR400 wear bars, with a 1 in...

The Eterra Mini Skid Steer Sickle Bar Mower cuts grass, brush and standing vegetation with a scissor action rather than a rotor. A 5 ft cutter bar ...

The Eterra Mini Skid Steer Auger Drive turns a mini skid steer into a post hole driller. It is a hydraulic auger drive with a 2 in hex output shaft...

The Baumalight ISH3P is a skid steer tree puller with a hydraulic jaw, gripping stems up to 4 in in diameter and lifting them out of the ground wit...

The Baumalight ISH3M is a mini skid steer tree puller with a hydraulic jaw, gripping saplings up to 2 in in diameter and lifting them out of the gr...

The Baumalight S40 is the fastest machine in the skid steer stump grinder range, cutting on both swing directions behind dual swing cylinders. It r...

The Baumalight S28 is the highest capacity machine in the skid steer stump grinder range, built for high flow carriers. It adds a high volume hydra...

The Baumalight S24 is a skid steer stump grinder with a hydraulic swing cylinder controlled through a 12 volt diverter valve, so the operator sets ...

The Baumalight S22 is a skid steer stump grinder with an electrically actuated swing, so the carrier's whole hydraulic flow goes to the rotor while...

The Baumalight S16 is a mini skid steer stump grinder with an electrically actuated swing, so the whole hydraulic flow of the carrier goes to the r...