Skip to content
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support

Flush Cut Concrete Blade | U.S. Saws

Brand U.S. SawsSKU STA16125-FLUSH
Original price $317.50 USD - Original price $540.30 USD
Original price
$317.50 USD
$317.50 USD - $540.30 USD
Current price $317.50 USD
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

The Flush Cut blade mounts on a six bolt flange rather than an arbor, so a flush cut saw can bring the rim right up against a wall, curb or driveway edge. Published in 16, 20 and 24 in for cured concrete, concrete pipe, brick and block.

Need fitment or freight help before you order? Contact us.

Shipping & Freight

We ship to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO/DPO) addresses or outside the United States.

Smaller items ship by parcel carrier, priced by weight. Larger items and heavy equipment ship by LTL freight, priced by your ZIP code and the delivery type you choose: terminal pickup and dock delivery cost the least, and commercial liftgate, residential liftgate and jobsite delivery each add the carrier’s fee. Your shipping cost is shown at checkout before you pay.

The best way to get a shipping quote or ask a freight question is the Get a Freight Quote button on this page. You can also call (805) 398-6165.

Delivery types, delivery times, terminal pickup, liftgate service and damage inspection are covered in our Shipping Policy.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Blade Diameter: 16 in, 20 in, 24 in
  • Thickness: .125 in at 16 in, .140 in at 20 and 24 in
  • Weight: Confirm at ordering

Fitment / Machine Requirements

  • Mount: 6 bolt flange, 1 in bore
  • Saw Types: handheld and walk behind flush cut saws


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns: within 30 days of delivery if unused and complete, with a restocking fee of up to 25% plus return freight. Returns need the manufacturer's agreement to take the item back; if they won't, the sale is final. Custom and made-to-order items are final sale. Full terms: Refund Policy.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

A flush cut saw exists to solve one problem: an ordinary blade guard and arbor nut stand proud of the blade, so the closest cut you can make to a wall is limited by the hardware rather than by the blade. This line is the consumable half of that answer. It bolts to a six bolt flange instead of clamping on an arbor, which puts the drive hardware behind the blade face and lets the rim run flat against the surface.

That mount is the whole selection question. These blades do not fit a standard hand-held or walk behind saw, and a standard blade does not fit a flush cut saw, so the six bolt pattern is a hard compatibility line rather than a preference. The cutting side is ordinary by comparison: cured concrete, concrete pipe, brick and block, at .125 in on the 16 in and .140 in on the two larger sizes. What a buyer gets for it is a closer, more accurate cut against concrete walls, curbs and driveways.

Common Applications

  • Cutting flush against concrete walls, curbs and driveways
  • Cutting cured concrete, concrete pipe, brick and block on flush cut saws
  • Close-tolerance work where an arbor mounted blade cannot reach the surface

Selection Notes

  • The six bolt flange is a hard fitment: these blades fit flush cut saws only
  • Published weights on this line are storefront defaults and are withheld; confirm shipping weight at ordering
  • The 20 and 24 in are both .140 in thick, so the choice between them is reach rather than kerf
Build
Mount
6 bolt flange pattern
Bore
1 in
Cutting Capacity
Materials
Concrete pipe, cured concrete, brick, block
Cut quality
Closer, more accurate and flush cuts against flat surfaces
Machine Notes
Saw types
Handheld and walk behind flush cut saws
SizeBlade DiameterThicknessMountWeight
16 in, 6 bolt flange16 in (406 mm).125 in6 bolt flange, 1 in boreConfirm at ordering
20 in, 6 bolt flange20 in (508 mm).140 in6 bolt flange, 1 in boreConfirm at ordering
24 in, 6 bolt flange24 in (610 mm).140 in6 bolt flange, 1 in boreConfirm at ordering
Six bolt flange mount
Puts the drive hardware behind the blade face so the rim reaches the surface
Flush cut geometry
Cuts closer and squarer against walls, curbs and driveways
Three diameters on one mount
Depth of cut changes without changing the saw or the flange

Included with Purchase

  • 1 Flush Cut Concrete Blade (variant/model as ordered)

Not Included Unless Stated

  • Flush cut saw, flange, or mounting bolts
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

Major Asphalt Blade | U.S. Saws

U.S. Saws
Original price $228.50 USD - Original price $518.10 USD
Original price
$228.50 USD - $518.10 USD
$228.50 USD - $518.10 USD
Current price $228.50 USD

The Major Asphalt is a diamond blade engineered specifically for cutting asphalt, in six sizes from 12 to 20 in. It also cuts asphalt over concrete...

View full details
Original price $228.50 USD - Original price $518.10 USD
Original price
$228.50 USD - $518.10 USD
$228.50 USD - $518.10 USD
Current price $228.50 USD

Jumbo Segment Blade | U.S. Saws

U.S. Saws
Original price $245.10 USD - Original price $245.10 USD
Original price
$245.10 USD
$245.10 USD - $245.10 USD
Current price $245.10 USD

The Jumbo Segment is a multipurpose concrete blade with tall stepped segments, published at 14 in x .125 in on a 1 in arbor with a 20 mm bushing. C...

View full details
Original price $245.10 USD - Original price $245.10 USD
Original price
$245.10 USD
$245.10 USD - $245.10 USD
Current price $245.10 USD

Dos Seggie Blade | U.S. Saws

U.S. Saws
Original price $211.70 USD - Original price $312.10 USD
Original price
$211.70 USD - $312.10 USD
$211.70 USD - $312.10 USD
Current price $211.70 USD

The Dos Seggie is a multipurpose diamond blade for concrete, asphalt and pipe, in four configurations from 12 to 16 in. The 14 in size is published...

View full details
Original price $211.70 USD - Original price $312.10 USD
Original price
$211.70 USD - $312.10 USD
$211.70 USD - $312.10 USD
Current price $211.70 USD

Colonel Concrete Blade | U.S. Saws

U.S. Saws
Original price $200.90 USD - Original price $477.90 USD
Original price
$200.90 USD - $477.90 USD
$200.90 USD - $477.90 USD
Current price $200.90 USD

The Colonel Concrete is a laser welded turbo segment blade for cured concrete, published in 12, 14, 16, 18 and 20 in. Thickness steps up with diame...

View full details
Original price $200.90 USD - Original price $477.90 USD
Original price
$200.90 USD - $477.90 USD
$200.90 USD - $477.90 USD
Current price $200.90 USD

Black Ops Blade | U.S. Saws

U.S. Saws
Original price $67.00 USD - Original price $90.60 USD
Original price
$67.00 USD - $90.60 USD
$67.00 USD - $90.60 USD
Current price $67.00 USD

The Black Ops is a low-cost general purpose diamond blade for cutting concrete, in three configurations at 12 and 14 in. The 14 in size is publishe...

View full details
Original price $67.00 USD - Original price $90.60 USD
Original price
$67.00 USD - $90.60 USD
$67.00 USD - $90.60 USD
Current price $67.00 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare