Skip to content
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support

EM120HYD Essick Plaster and Mortar Mixer | Multiquip

Brand MultiquipSKU EM120HYD
Original price $11,455.00 USD - Original price $11,455.00 USD
Original price
$11,455.00 USD
$11,455.00 USD - $11,455.00 USD
Current price $11,455.00 USD
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

The EM120HYD is Essick's 12 cu ft towable plaster and mortar mixer on a hydraulic drive with a hydraulic dump, turned by an 11.7 HP Honda GX390 and built on a 7-gauge steel drum. The hydraulic dump discharges into polyethylene mud tubs, which are ordered separately.

Need fitment or freight help before you order? Contact us.

Shipping & Freight

We ship to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO/DPO) addresses or outside the United States.

Smaller items ship by parcel carrier, priced by weight. Larger items and heavy equipment ship by LTL freight, priced by your ZIP code and the delivery type you choose: terminal pickup and dock delivery cost the least, and commercial liftgate, residential liftgate and jobsite delivery each add the carrier’s fee. Your shipping cost is shown at checkout before you pay.

The best way to get a shipping quote or ask a freight question is the Get a Freight Quote button on this page. You can also call (805) 398-6165.

Delivery types, delivery times, terminal pickup, liftgate service and damage inspection are covered in our Shipping Policy.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 1090 lbs operating
  • Drum Capacity: 12 cu ft (339.8 L), 3-1/2 to 4 bags
  • Drum: 7-gauge steel
  • Drive System: Hydraulic
  • Dump Type: Hydraulic
  • Engine: Honda GX390, 11.7 HP, recoil start, gasoline
  • Discharge Height: 17 in
  • Lead Time: confirm with supplier


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns: within 30 days of delivery if unused and complete, with a restocking fee of up to 25% plus return freight. Returns need the manufacturer's agreement to take the item back; if they won't, the sale is final. Custom and made-to-order items are final sale. Full terms: Refund Policy.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

Where a mason's mixer has to take the stiffest mixes a job puts through it, the drive between the engine and the paddle shaft is what decides whether the machine works or stalls. The EM120HYD runs a hydraulic drive rather than a belt or a gearbox, so torque arrives at the paddles as pressure rather than as friction, and a load that would slip a belt simply draws more oil. The dump is hydraulic too, which means a full drum empties on a lever instead of on the operator's back.

Discharge is aimed at polyethylene mud tubs, and the machine is built around that workflow: the drum tips under power straight into the tub rather than into a barrow that then has to be moved. The paddle shaft seals are spring loaded and self adjusting, requiring no greasing at all, which is the failure point that normally ends a mixer's life once grit works into a grease fitting. This is built for the plastering and masonry crews running heavy mixes into tubs all day, not for the crew that mixes by the barrow.

Common Applications

  • Mixing heavy plaster and stucco mixes into polyethylene mud tubs
  • Mixing mortar for masonry and block work at full crew scale
  • Mixing stiff structural mixes that would slip a belt-driven machine
  • Towed batch work where the mixer moves between sites behind a truck

Selection Notes

  • Choose this over the mechanical-gearbox EM12M where the mixes are stiffest and where a hydraulic dump into tubs is the workflow, rather than a manual dump into barrows
  • Mud tubs are not supplied with the machine and are ordered separately; specify them at the same time if the discharge workflow depends on them
  • The drum wall here is 7 gauge against the EM12M's 9 gauge, so this is the thicker-walled of the two 12 cu ft machines as well as the hydraulically driven one
Capacity
Drum capacity
12 cu ft (339.8 L)
Batch size
3-1/2 to 4 bags
Discharge height
17 in (430 mm)
Build
Drum type
Steel, 7 gauge
Engine cover thickness
Steel, 14 gauge
Paint type
Powder coat
Tire size
B78x13 in
Shaft seals
Spring loaded, self adjusting, no greasing required
Unit Specifications
Drive system
Hydraulic
Dump type
Hydraulic
Engine make and model
Honda GX390
Engine power
11.7 HP (8.7 kW)
Engine speed
3600 rpm
Start method
Recoil
Fuel type
Gasoline
Hydraulics
Hydraulic flow
Confirm with supplier
Hydraulic pressure
Confirm with supplier
Machine Notes
Discharge target
Polyethylene mud tubs, ordered separately
Dimensions & Weights
Overall length
110 in
Overall width
51 in
Overall height
63 in
Operating weight
1090 lb (494.4 kg)
Hydraulic drive to the paddle shaft
A stiff mix draws more oil instead of slipping a belt, so the drum keeps turning under the loads that stall lighter drives
Hydraulic dump
A full drum empties on a lever rather than on the operator
Spring loaded self adjusting seals
No grease fitting means no path for grit into the paddle shaft bearing

Included with Purchase

  • 1 EM120HYD Essick Plaster and Mortar Mixer (variant/model as ordered)

Not Included Unless Stated

  • Polyethylene mud tubs
  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

EM90-Series Essick Plaster and Mortar Mixer | Multiquip

Multiquip
Original price $5,732.00 USD - Original price $5,876.00 USD
Original price
$5,732.00 USD - $5,876.00 USD
$5,732.00 USD - $5,876.00 USD
Current price $5,732.00 USD

The EM90-Series is Essick's 9 cu ft steel-drum plaster and mortar mixer, running a 10-gauge drum on a V-belt drive with an idler wheel for paddle e...

View full details
Original price $5,732.00 USD - Original price $5,876.00 USD
Original price
$5,732.00 USD - $5,876.00 USD
$5,732.00 USD - $5,876.00 USD
Current price $5,732.00 USD

EM70-Series Essick Plaster and Mortar Mixer | Multiquip

Multiquip
Original price $5,011.00 USD - Original price $5,564.00 USD
Original price
$5,011.00 USD - $5,564.00 USD
$5,011.00 USD - $5,564.00 USD
Current price $5,011.00 USD

The EM70-Series is Essick's 7 cu ft steel-drum plaster and mortar mixer, built on a 10-gauge drum with a V-belt drive and a manual dump at a 21 in ...

View full details
Original price $5,011.00 USD - Original price $5,564.00 USD
Original price
$5,011.00 USD - $5,564.00 USD
$5,011.00 USD - $5,564.00 USD
Current price $5,011.00 USD

EM12M Essick Plaster and Mortar Mixer | Multiquip

Multiquip
Original price $8,423.50 USD - Original price $8,423.50 USD
Original price
$8,423.50 USD
$8,423.50 USD - $8,423.50 USD
Current price $8,423.50 USD

The EM12M is Essick's 12 cu ft towable plaster and mortar mixer on a mechanical gearbox drive, turned by an 11.7 HP Honda GX390UT and carrying a 9-...

View full details
Original price $8,423.50 USD - Original price $8,423.50 USD
Original price
$8,423.50 USD
$8,423.50 USD - $8,423.50 USD
Current price $8,423.50 USD

Mix 360 Mixer | IMER

IMER
Original price $9,599.00 USD - Original price $9,599.00 USD
Original price
$9,599.00 USD
$9,599.00 USD - $9,599.00 USD
Current price $9,599.00 USD

Mix 360 towable vertical shaft paddle mixer, 12 cu ft drum, 9 cu ft batch output. Available with an 11 HP Honda GXV390 gas engine or a 240V, 5 HP s...

View full details
Original price $9,599.00 USD - Original price $9,599.00 USD
Original price
$9,599.00 USD
$9,599.00 USD - $9,599.00 USD
Current price $9,599.00 USD

Mix 120 Mixer | IMER

IMER
Original price $3,849.00 USD - Original price $3,849.00 USD
Original price
$3,849.00 USD
$3,849.00 USD - $3,849.00 USD
Current price $3,849.00 USD

Mix 120 vertical shaft paddle mixer, 4.25 cu ft drum, 2 HP 120V motor with reverse. Continuous mixing action outproduces a towable drum mixer on dr...

View full details
Original price $3,849.00 USD - Original price $3,849.00 USD
Original price
$3,849.00 USD
$3,849.00 USD - $3,849.00 USD
Current price $3,849.00 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare