Skip to content
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support
Equipment Fitment & Selection Assistance | Delivery to the 48 Contiguous States | U.S.-Based Phone and Email Support

PRO12-Series Essick Plaster and Mortar Mixer | Multiquip

Brand MultiquipSKU PRO12
Original price $13,933.00 USD - Original price $16,530.00 USD
Original price
$13,933.00 USD
$13,933.00 USD - $16,530.00 USD
Current price $13,933.00 USD
Authorized Dealer Sourcing
Financing Available for Eligible Orders
Contractor-Grade Equipment

The PRO12-Series is Essick's 12 cu ft hydraulic-drive plaster and mortar mixer with an over-center dump and a drum height adjustable up to 42.5 in. It handles aggregate to 1 in, folds onto 130 degree swing-away stabilizers, and is ordered with an 11.7 HP Honda engine or one of three Teco Westinghouse 5 HP electric motors.

Need fitment or freight help before you order? Contact us.

Shipping & Freight

We ship to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, military (APO/FPO/DPO) addresses or outside the United States.

Smaller items ship by parcel carrier, priced by weight. Larger items and heavy equipment ship by LTL freight, priced by your ZIP code and the delivery type you choose: terminal pickup and dock delivery cost the least, and commercial liftgate, residential liftgate and jobsite delivery each add the carrier’s fee. Your shipping cost is shown at checkout before you pay.

The best way to get a shipping quote or ask a freight question is the Get a Freight Quote button on this page. You can also call (805) 398-6165.

Delivery types, delivery times, terminal pickup, liftgate service and damage inspection are covered in our Shipping Policy.

Compatibility / Fitment

Compatibility varies by product type, machine setup, selected options, and intended application.

For machine-mounted equipment and attachments, buyers should confirm fitment before ordering using the relevant machine information, including model, attachment style, mount type, coupler type, hydraulic requirements, and any other product-specific requirements listed on the page.

Hardscape Heavy can assist with pre-order fitment guidance based on the information you provide. This guidance is limited to purchase and compatibility review before ordering and does not include field installation, hydraulic modification, fabrication, or on-site setup support.

If you are unsure whether a product will work with your machine or application, contact us before placing the order.

Specifications

Core Specs

  • Weight: 1580 lbs operating
  • Drum Capacity: 12 cu ft (340 L), 3 to 4 bags
  • Max Aggregate Size: 1 in (25.4 mm)
  • Drive System: Hydraulic
  • Dump Action: Hydraulic, over-center
  • Discharge Height: adjustable, 24 to 42.5 in
  • Fuel Capacity: 5 gal, up to 8 hours run time
  • Lead Time: confirm with supplier


Need full technical detail?
See the Technical Details tab. If available, also see manufacturer PDF in the Downloads tab.

Returns & Warranty

Warranty coverage is provided by the product manufacturer where applicable. Warranty terms, coverage periods, exclusions, and claim procedures vary by brand and product type.

Hardscape Heavy does not create separate warranty coverage beyond the manufacturer’s warranty unless explicitly stated on the product page.

Returns: within 30 days of delivery if unused and complete, with a restocking fee of up to 25% plus return freight. Returns need the manufacturer's agreement to take the item back; if they won't, the sale is final. Custom and made-to-order items are final sale. Full terms: Refund Policy.

Please review our full return policy before purchase. If you have questions about return eligibility or manufacturer warranty coverage for a specific item, contact us before ordering.

Silo-dispensed material changes how a mixer has to be laid out, because the mud comes to the machine and the machine has to give it back at height without the crew lifting anything. Essick built the PRO12 around that: the operator loads at waist level, and an over-center dump raises the drum to discharge into a large tub rather than tipping into whatever fits underneath. A hydraulic drive turns the paddles, so the stiffest mixes draw more oil instead of slipping a belt.

The frame folds in on swing-away stabilizers that swing through 130 degrees, and the hydraulic motor sits inboard, which together give a machine that fits a standard pickup bed once it is closed up. Forklift pockets are cut on every side so the machine can be picked from whichever direction the yard allows, a spill plate returns the material that would otherwise land on the ground, and the drive and dump controls sit above the engine cowling where the operator already stands. This is built for the crews running silo systems and heavy mix designs on commercial work, not for the contractor batching by the bag.

Common Applications

  • Mixing material dispensed from an on-site silo system
  • Mixing stiff mortar, plaster and structural mixes on commercial work
  • Mixing material containing aggregate up to 1 in
  • Discharging into large mud tubs at an adjustable height

Selection Notes

  • Choose the Honda build where the machine has to work away from a supply; it is also the lowest-priced of the four
  • Among the electric builds, three-phase 230 V is the least expensive, single-phase 230 V sits between, and three-phase 460 V is the highest; match the drive to the supply actually available on the job rather than to price
  • Step up to the PRO20 where batches of six to seven bags are wanted rather than three to four, since drum capacity and engine are what separate them
Capacity
Drum capacity
12 cu ft (340 L)
Batch size
3 to 4 bags
Max aggregate size
1 in (25.4 mm)
Adjustable drum discharge height
24 to 42.5 in
Fuel capacity
5 gal, up to 8 hours run time
Build
Drum wrap
1/4 in steel wrap with 3/8 in ends
Stabilizers
130 degree swing-away
Handling
Forklift pockets accessible from any side
Spill plate
Directs excess material back into the tub
Paddle shaft seal
Greasable
Transport
Fits a standard pickup truck bed with the inboard hydraulic motor
Unit Specifications
Drive system
Hydraulic
Dump action
Hydraulic, over-center
Loading height
Waist level
Controls
Drive and dump controls above the engine cowling
Drive options
Honda GX390 11.7 HP, or Teco Westinghouse 5.0 HP electric at 230 V single phase, 230 V three phase, or 460 V three phase
Hydraulics
Hydraulic flow
Confirm with supplier
Hydraulic pressure
Confirm with supplier
Dimensions & Weights
Overall length
73.5 in
Overall width
35 in (889 mm)
Overall height
45 in (1143 mm)
Operating weight
1580 lb (716.68 kg)
Drive options
DriveModelDrum CapacityOperating Weight
Honda GX390, 11.7 HPPRO1212 cu ft (340 L)1580 lb (716.68 kg)
Electric, 5 HP 230 V 1-phasePRO12E5112 cu ft (340 L)1580 lb (716.68 kg)
Electric, 5 HP 230 V 3-phasePRO12E5312 cu ft (340 L)1580 lb (716.68 kg)
Electric, 5 HP 460 V 3-phasePRO12E53-460V12 cu ft (340 L)1580 lb (716.68 kg)
Over-center dump with adjustable height
Loading happens at waist level and discharge happens above a large tub, so neither end of the cycle is a lift
130 degree swing-away stabilizers
The machine opens up for a stable footprint on site and closes down to fit a pickup bed
Spill plate at the drum
The material that would land on the ground goes back into the tub instead

Included with Purchase

  • 1 PRO12-Series Essick Plaster and Mortar Mixer (variant/model as ordered)

Not Included Unless Stated

  • On-site installation or machine configuration

Note: Confirm exact included components and mount hardware with supplier at time of order.

Related Equipment

EM90-Series Essick Plaster and Mortar Mixer | Multiquip

Multiquip
Original price $5,732.00 USD - Original price $5,876.00 USD
Original price
$5,732.00 USD - $5,876.00 USD
$5,732.00 USD - $5,876.00 USD
Current price $5,732.00 USD

The EM90-Series is Essick's 9 cu ft steel-drum plaster and mortar mixer, running a 10-gauge drum on a V-belt drive with an idler wheel for paddle e...

View full details
Original price $5,732.00 USD - Original price $5,876.00 USD
Original price
$5,732.00 USD - $5,876.00 USD
$5,732.00 USD - $5,876.00 USD
Current price $5,732.00 USD

EM70-Series Essick Plaster and Mortar Mixer | Multiquip

Multiquip
Original price $5,011.00 USD - Original price $5,564.00 USD
Original price
$5,011.00 USD - $5,564.00 USD
$5,011.00 USD - $5,564.00 USD
Current price $5,011.00 USD

The EM70-Series is Essick's 7 cu ft steel-drum plaster and mortar mixer, built on a 10-gauge drum with a V-belt drive and a manual dump at a 21 in ...

View full details
Original price $5,011.00 USD - Original price $5,564.00 USD
Original price
$5,011.00 USD - $5,564.00 USD
$5,011.00 USD - $5,564.00 USD
Current price $5,011.00 USD

EM12M Essick Plaster and Mortar Mixer | Multiquip

Multiquip
Original price $8,423.50 USD - Original price $8,423.50 USD
Original price
$8,423.50 USD
$8,423.50 USD - $8,423.50 USD
Current price $8,423.50 USD

The EM12M is Essick's 12 cu ft towable plaster and mortar mixer on a mechanical gearbox drive, turned by an 11.7 HP Honda GX390UT and carrying a 9-...

View full details
Original price $8,423.50 USD - Original price $8,423.50 USD
Original price
$8,423.50 USD
$8,423.50 USD - $8,423.50 USD
Current price $8,423.50 USD

EM120HYD Essick Plaster and Mortar Mixer | Multiquip

Multiquip
Original price $11,455.00 USD - Original price $11,455.00 USD
Original price
$11,455.00 USD
$11,455.00 USD - $11,455.00 USD
Current price $11,455.00 USD

The EM120HYD is Essick's 12 cu ft towable plaster and mortar mixer on a hydraulic drive with a hydraulic dump, turned by an 11.7 HP Honda GX390 and...

View full details
Original price $11,455.00 USD - Original price $11,455.00 USD
Original price
$11,455.00 USD
$11,455.00 USD - $11,455.00 USD
Current price $11,455.00 USD

Mix 360 Mixer | IMER

IMER
Original price $9,599.00 USD - Original price $9,599.00 USD
Original price
$9,599.00 USD
$9,599.00 USD - $9,599.00 USD
Current price $9,599.00 USD

Mix 360 towable vertical shaft paddle mixer, 12 cu ft drum, 9 cu ft batch output. Available with an 11 HP Honda GXV390 gas engine or a 240V, 5 HP s...

View full details
Original price $9,599.00 USD - Original price $9,599.00 USD
Original price
$9,599.00 USD
$9,599.00 USD - $9,599.00 USD
Current price $9,599.00 USD

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare